Focal Omada N3 Floorstanding Speakers (Pair)

The Focal Omada N3 is a 3-way bass-reflex floorstanding loudspeaker designed for dedicated two-channel listening and front-channel duty in a home theatre system. It combines three 6.5-inch Slatefiber woofers with a dedicated 6.5-inch Slatefiber midrange driver and Focal's TAM tweeter, producing a linear, neutral sound that makes it the sweet spot of the Omada range. The Focal Omada N3 is recommended for rooms of at least 25 square metres and is available at Trutone Electronics in Mississauga, Ontario.

The Focal Omada N3 uses three 6.5-inch Slatefiber woofers, while the Focal Omada N4 uses two larger 8.25-inch woofers, giving the N4 a higher amplifier power ceiling of 350 watts versus 300 watts and greater dynamic authority. Low-frequency extension is nearly identical between the two models, so the practical difference comes down to scale and headroom rather than bass depth. Buyers who want maximum authority in a larger room typically choose the N4; those seeking a balanced all-rounder often settle on the N3.

The Focal Omada N3 is rated for 40 to 300 watts per channel with 92dB sensitivity, making it relatively easy to drive with moderate amplifier power. The minimum impedance of 2.9 ohms means buyers should confirm their amplifier or AV receiver performs well into lower-impedance loads, particularly at higher listening volumes.

The Focal Omada N3 uses Focal's Multi-Port Powerflow system, combining a front-firing and a rear-firing port in a single bass-reflex enclosure. This dual-port approach reduces dynamic compression at higher listening levels while reinforcing the lowest octave of bass output. Because of the rear port, the Focal Omada N3 benefits from some clearance behind the cabinet rather than being placed flush against a back wall.

Focal recommends the Omada N3 for rooms of at least 25 square metres (270 square feet). This reflects the speaker's three-woofer bass output and overall scale, intended to fill a medium to large room rather than a small bedroom or office. Buyers in smaller spaces are typically better served by the compact Focal Omada N1 bookshelf model.

The Focal Omada N3 sits on an aluminium base that tilts the cabinet slightly backward, aligning the acoustic centres of the woofers, midrange, and tweeter in time relative to the listener. This time alignment improves imaging precision and centres the soundstage more accurately than a flat-footed cabinet. The tilt is a fixed mechanical feature built into the included base.

The Focal Omada N3 is designed to function equally well as a dedicated two-channel music speaker or as front left and right channels in a home theatre system. Its 42 Hz to 30 kHz frequency response and 92dB sensitivity give it the dynamic range to handle both critical music listening and movie soundtracks without strain. Pairing the Focal Omada N3 with the matching Focal Omada Center creates a cohesive front soundstage for home theatre use.

The Focal Omada N3 uses three 6.5-inch Slatefiber woofers for bass, a dedicated 6.5-inch Slatefiber midrange for clarity and presence, and a 25mm aluminium/magnesium TAM tweeter extending to 30 kHz. All drivers use Focal's recycled-carbon-fibre Slatefiber cone material, chosen for its balance of rigidity and damping.