Monitor Audio SILVER FX Rear Speaker - Gloss Black (Pair)
Monitor Audio SILVER FX Rear Speaker - Black Oak (Pair)
Monitor Audio SILVER FX Rear Speaker - Rosenut (Pair)
Monitor Audio SILVER FX Rear Speaker - Satin White (Pair)
Monitor Audio SILVER FX Rear Speaker - Gloss Black (Pair)
Monitor Audio SILVER FX Rear Speaker - Walnut (Pair)
Monitor Audio SILVER FX Rear Speaker - Natural Oak (Pair)
Monitor Audio PROMO Save 15% on Monitor Audio's Outdoor All-Weather Speaker ranges! See Details
Save 15% on Monitor Audio's Outdoor All-Weather Speaker ranges!
Save BIG on Monitor Audio's all-weather speaker ranges. Includes AWC, Climate, Garden and Vecta Series.
This wall-mountable compact two-way design offers dual dispersion characteristics for the perfect surround sound set-up.
The discreet profile and angled baffle design of Monitor Audio’s specially-developed Silver FX incorporates a single 6-inch C-CAM bass/mid driver featuring RST technology and C-CAM Gold Dome tweeters.
The Silver FX can be flush-mounted on side or rear walls where it blends unobtrusively with any interior. Its dispersion characteristics can be easily changed with a switch to accommodate the precise requirements for dipole or bipole orientation, giving it maximum flexibility in multi-channel system installations.
TECHNOLOGY
- Discreet design with flush wall placement and with recessed terminations
- Sealed cabinet for accurate performance when installed in cabinet, restricted voids or close to a wall
- Dual 25 mm C-CAM (Ceramic-Coated Aluminium/Magnesium) tweeters featuring vented Neo magnet system tuned for lower distortion and cleaner-sounding highs
- 6-inch bass/mid driver with ‘dished’ C-CAM cone profile ensures best damping and mid-range clarity
- RST Cone profile for improved diaphragm rigidity and lower distortion
- Unique-build ring/voice coil-cone coupling mechanism (DCF) carefully optimised to reduce high-frequency cone break-up and increasing the critical voice coil circumferential rigidity
- Cast polymer driver chassis design means improved rigidity and damping characteristics
- Pureflow silver-plated OFC copper internal cabling for the highest quality transfer through the signal chain
- High-quality crossovers using premium-grade bespoke polypropylene film capacitors, air-core and low-loss laminated steel-core inductors giving maximum signal transfer
- Rigid 20 mm MDF construction utilising scientifically optimised cabinet bracing
- Single bolt-through driver technology provides increased bracing strength, rigidity and driver/baffle de-coupling
- Bespoke, high-quality bi-wire terminals
- Selected, premium-quality wood veneers, high-gloss lacquer and contemporary Satin White finishes
- Easily switchable dipole/ bipole modes.
Specifications | |
---|---|
System Format | 2-way |
Frequency Response (-6 dB) | 60 Hz – 35 kHz |
Sensitivity (1W@1M) | 87 dB |
Nominal Impedance | 8 ohms |
Minimum Impedance | 4 ohms @ 229 Hz |
Maximum SPL | 110 dBA (pair) |
Power Handling (RMS) | 85 W |
Recommended Amplifier Requirements | 30 – 85 W |
Bass Alignment | Sealed cabinet |
Crossover Frequency | 2.5 kHz |
Drive Unit Complement | 1 x 6” RST bass/mid driver 2 x 1” (25 mm) Gold Dome C-CAM tweeter |
Cabinet Dimensions (excluding grille and terminals) | 250 x 310 x 130 mm |
External Dimensions (including grille and terminals) | 250 x 322 x 147 mm |
External Dimensions (including out-rigger plates, feet and spikes) | N/A |
Weight (each) | 4.3 kg |
Downloads | |
Manual | Download |
Write a review
Featured Products
KANTA 2 (CW)
$14,298.00
SOPRA-N2-WHITE
$25,998.00
ONE BLK G2
$269.00
D-M41
$779.00
CINEMA SUB
$499.99
SOPRA-N3-BLACK
$33,798.00
SSCS3
$329.99
KANTA 3 - IVORY
$19,498.00