It implements Luxul’s exclusive and patented technology to deliver 4 times the coverage of traditional Wi-Fi equipment. It is simple to install and is a great choice for delivering coverage to outdoor areas or as a point-to-point/point-to multipoint bridge solution.
USE THE XAP-1040 TO:
- Provide a High Performance Outdoor 802.11n Wi-Fi Network
- Setup a Superior Point-to-Point or Point-to-Multipoint Bridge Link
- Increase Mobile Client Device Network Sensitivity and Performance
- Simplify Installation While Minimizing Setup Time and Expense
- Eliminate Client Device Roaming Issues
FEATURES:
- Patented Signal Technology
- Highest FCC Approved Performance (Effective EIRP 36dBm)
- 18dB of Receive Gain Increases Client Device Network Sensitivity
- 2.4 GHz IEEE 802.11n Compliant
- QoS Functionality
- Enhanced Multi-Level Security
- Up to 8 SSIDs and Support for VLAN Tagging
- Single Cable Installation with POE
- Weather Resistant IP-66 Compliant Enclosure
Specifications | |
---|---|
Standards „ | IEEE 802.11n, „ IEEE 802.11b/g, „ IEEE 802.3af, „ IP-66, |
Hardware | LAN Port: 1 RJ45 10/100 Mbps data and power input, „ 7dBi Circular Polarized Directional Antenna, „ LEDs: All LEDs are internal and not visible with cover in place (Power, WLAN active, LAN link/activity, Bridge mode active). |
Hardware | LAN Port: 1 RJ45 10/100 Mbps data and power input, „ 7dBi Circular Polarized Directional Antenna, „ LEDs: All LEDs are internal and not visible with cover in place (Power, WLAN active, LAN link/activity, Bridge mode active). |
RF Information „ | Frequency Band: 2.401 – 2.473GHz „ Operating Channels: 11 |
Available Transmit Power | 2.401 – 2.473GHz (IEEE802.11g/n): Up to 36dBm EIRP 30dBm @ 6~9Mbps / MCS0, 29dBm @ 12~18Mbps / MCS1-2, 27dBm @ 24~36Mbps / MCS3-4, 26dBm @ 48~54Mbps / MCS5-7, 2.401 – 2.473GHz (IEEE802.11b): Up to 36dBm EIRP 30dBm @ 1~11Mbps |
Available Receive Gain | 2.401 – 2.473GHz (IEEE802.11g/n): Up to 18dBm „ 2.401 – 2.473GHz (IEEE802.11b): Up to 18dBm |
Receive Sensitivity (Typical) | 2.401 – 2.473GHz (IEEE802.11n): Up to -91dBm „ 2.401 – 2.473GHz (IEEE802.11g): Up to -92dBm „ 2.401 – 2.473GHz (IEEE802.11b): Up to -93dBm |
Wireless Operation Modes | „ Access Point, „ Point-to Point Wireless Bridge, „ Point-to-Multipoint Wireless Bridge |
Remote Web-based Management | „ WEP (128 bit) „ WPA-PSK (TKIP, AES, TKIP&AES) „ WPA2-PSK (AES) „ WPA-PSK/WPA2-PSK Auto (TKIP&AES) „ Web Based Firmware Upgrade „ QoS: Wireless Multi-Media (WMM) Extensions |
Certifications „ | FCC Part 15, Class B |
Power Requirements | „ Ethernet POE in: 48VDC/0.375A for IEEE 802.3af Compliance „ Power Consumption: 5W Nominal, 13W Max |
Temperature Range | „ Operating: -4°F to 131°F (-20°C to 55°C) „ Storage: -40°F to 158°F (-40°C to 70°C) |
Operating Humidity | 5% to 95% (Non-condensing |