Current Flyer
(0)
0

LUXUL XAP-1032 Commercial Grade Dual Directional 802.11n Wireless Access Point

Discontinued

Authorized Dealer

LUXUL XAP-1032 Commercial Grade Dual Directional 802.11n Wireless Access Point

XAP-1032


We now offer financing powered by


With two directional antennas that can be aimed towards the desired coverage areas, the XAP-1032 is designed to optimize coverage within L-shaped, multi-wing, or very large residential or commercial installations. With Luxul’s exclusive and patented technology it delivers 4 times the coverage of traditional Wi-Fi equipment.

USE THE XAP-1032 TO:

  • Optimize Wi-Fi Coverage in L-Shaped, Multi-Wing or Extra Large Installations
  • Deliver “Whole Home” or Office 802.11n Wi-Fi Coverage
  • Increase Mobile Client Device Network Sensitivity and Performance
  • Simplify Installation While Minimizing Setup Time and Expense
  • Eliminate Client Device Roaming Issues

FEATURES:

  • Patented Signal Technology
  • Highest FCC Approved Performance (Effective EIRP 36dBm)
  • 18dB of Receive Gain Increases Client Device Network Sensitivity
  • 2.4 GHz IEEE 802.11n Compliant
  • QoS Functionality
  • Enhanced Multi-Level Security
  • Up to 8 SSIDs and Support for VLAN Tagging
  • Single Cable Installation with POE
Specificatiions
Standards „ IEEE 802.11n IEEE 802.11b/g „IEEE 802.3af
Hardware„ LAN Port: 1 RJ45 10/100 Mbps data and power input, Two 7dBi Circular Polarized Directional Antennas, System LEDs: Power, WLAN active, LAN link/activity, Bridge mode active.
RF Information„ Frequency Band: 2.401 – 2.473GHz „ Operating Channels: 11
Available Transmit Power2.401 – 2.473GHz (IEEE802.11g/n): Up to 36dBm EIRP 30dBm @ 6~9Mbps / MCS0, 29dBm @ 12~18Mbps / MCS1-2, 27dBm @ 24~36Mbps / MCS3-4, 26dBm @ 48~54Mbps / MCS5-7, 2.401 – 2.473GHz (IEEE802.11b): Up to 36dBm EIRP 30dBm @ 1~11Mbps
Available Receive Gain2.401 – 2.473GHz (IEEE802.11g/n): Up to 18dBm, 2.401 – 2.473GHz (IEEE802.11b): Up to 18dBm
Receive Sensitivity (Typical)2.401 – 2.473GHz (IEEE802.11n): Up to -91dBm, 2.401 – 2.473GHz (IEEE802.11g): Up to -92dBm, 2.401 – 2.473GHz (IEEE802.11b): Up to -93dBm,
Wireless Operation ModesAccess Point, Point-to Point Wireless Bridge, Point-to-Multipoint Wireless Bridge
Management and SecurityRemote Web-based Management WEP (128 bit), WPA-PSK (TKIP, AES, TKIP&AES), WPA2-PSK (AES), WPA-PSK/WPA2-PSK Auto (TKIP&AES), Web Based Firmware Upgrade, QoS: Wireless Multi-Media (WMM) Extensions,
Certifications „ FCC Part 15, Class B
Power Requirements„ Ethernet POE in: 48VDC/0.375A for IEEE 802.3af Compliance, „ Power Consumption: 5W Nominal, 13W Max
Temperature Range Operating: -4°F to 140°F (-20°C to 60°C) „ Storage: -40°F to 158°F (-40°C to 70°C)
Operating HumidityOperating: -4°F to 140°F (-20°C to 60°C) „ Storage: -40°F to 158°F (-40°C to 70°C)
MechanicalAccess Point Dimensions WxHxD: 7”(177.8mm) x 4”(101.6mm) x 1.25”(25.4mm), „ Antenna Dimensions WxHxD: 4.25”(113mm) x 4.25”(113mm) x 1”(25.4mm)
Power Requirements„ Ethernet POE in: 48VDC/0.375A for IEEE 802.3af Compliance, „ Power Consumption: 5W Nominal, 13W Max
Temperature Range Operating: -4°F to 140°F (-20°C to 60°C) „ Storage: -40°F to 158°F (-40°C to 70°C)

Write a review


Submit