Denon AVR-A10H 13.4 Channel 150W 8K AV Receiver with HEOS® Built-in
Denon AVR-A10H 13.4 Channel 150W 8K AV Receiver with HEOS® Built-in
Power your dream sound system with the Denon AVR-A10H. Featuring a robust 13.4-channel amplifier, it drives up to 13 speakers and 4 subwoofers, delivering 150 watts per channel. Enjoy immersive formats like Dolby Atmos, DTS:X, IMAX Enhanced, and AURO-3D; stunning 8K visuals; and audiophile-quality sound. Crafted in Japan for unparalleled excellence.
- 13.4 channel amplifier
- 8K Ultra HD
- HEOS Built-in
- 150 watts per channel
- Dolby Atmos, DTS:X Pro, IMAX Enhanced
- Dirac Live Ready
Highlights
- Robust 13.4-channel amplifier: The AVR-A10H’s 13-channel monolithic amplifier delivers 150 watts per channel. As is typical in high-end amplifier designs, each channel is built on its own PCB to minimize crosstalk and distortion.
- State-of-the-art home theater: All seven HDMI inputs support the highest resolution and fastest frame rates available. The AVR-A10H can pass-through signals up to 8K/60Hz or 4K/120Hz frame rates in gaming scenarios.
- Immersive 3D sound: 13.4-channel processing powers systems up to 7.4.6 or 9.4.4 speaker configurations with support for Dolby Atmos, DTS:X Pro, IMAX Enhanced, AURO-3D, and more.
- Next-generation gaming compatibility: With the latest HDMI specification, each HDMI port supports 4K/120Hz which means your video frame rate increases so you can always see who is coming around the corner.
- Hi-fi quality, inside and out: Nine audiophile-grade 2-channel DACs maximize resolution for all 17 channels. Premium gold-plated speaker terminals and a rigid, three-layer chassis protect against vibration and interference, significantly reducing noise.
- HEOS Built-in: Stream music wirelessly from a variety of free and premium streaming services. Share content to HEOS-enabled devices, like Denon Home speakers, in other rooms.
- Audyssey room correction: Audyssey room correction optimizes your system’s sound for any space. Upgrade to the Audyssey MultEQ editor app or MultEQ-X PC software (fee required) for advanced control.
- Dirac Live upgradability for acoustic optimization: Dirac Live® Room Correction applies state-of-the-art, patented algorithms to digitally analyze and minimize room impact and optimize speaker performance.
- Engineered and built in Japan: Designed and manufactured in Denon's Shirakawa factory in Japan, the AVR-A10H was tuned by the Denon Sound Master to provide the truest sonic reproduction.
| Technical Information | |
|---|---|
| Number of Power Amps | 13 |
| Power Output | 150 watts per channel (8 ohm, 20Hz - 20kHz,0.05% 2ch Drive), 190 watts per channel (6 ohm, 1kHz, 0.7% 2ch Drive), 260 watts per channel (6 ohm, 1kHz,10% 1ch Drive) |
| Auto Speaker Setup by Microphone | Audyssey MultEQ XT32 |
| Front Display | 2 Lines FLD |
| GUI Languages | 9 |
| General | |
| System Remote Control | RC-1261 |
| Power Consumption in W | 900W |
| Power Consumption No-Sound (ECO on/off) in W | 70W/125W |
| Standby Consumption in W | 0.1W |
| CEC Standby Consumption in W | 0.5W |
| Network Standby Consumption in W | Less than 2.0W |
| Maximum Dimensions Antenna, Horizontal: (W × D × H) in inches | 17.1 × 19 × 7.7 |
| Maximum Dimensions Antenna, Vertical: (W × D × H) in inches | 17.1 × 19 × 10.2 |
| Maximum Dimensions Antenna, w/o Antenna: (W × D × H) in inches | 17.1 × 18.6 × 7.7 |
| Weight in lbs | 52 lbs |
| INPUTS/OUTPUTS | |
| HDMI In/Out | 7/3 |
| Analog In/Out | 6+1 / 0 |
| Phono (MM) In | Yes |
| Digital In: Optical / Coaxial | 2 / 2 |
| Multi-Room Out: Analog / Digital | 2 / 0 |
| Multichannel Pre-Out | Yes (15.4) |
| Subwoofer Out | 4 (independent) |
| Other | |
| Number of Speaker Terminals | 15 |
| Speaker A/B | Assignable |
| Bi-Amp Drive | Assignable |
| Multi-Room Speaker Terminal | Assignable |
