{"title":"Audioquest","description":"\u003cp\u003e\u003cstrong data-start=\"110\" data-end=\"180\"\u003eDiscover AudioQuest cables and accessories at Trutone Electronics.\u003c\/strong\u003e From high-performance HDMI and speaker cables to power conditioning and digital audio solutions, AudioQuest products are engineered to preserve signal integrity and elevate every listening experience.\u003c\/p\u003e","products":[{"product_id":"audioquest-forest-digital-coax","title":"AudioQuest Forest Coaxial Digital Cable","description":"AudioQuest Digital Coax cables are designed to minimize distortion across an extremely wide bandwidth. For many applications, the speed of digital communication is important. Most visibly, “speed” is about transferring large files as quickly as possible, or carrying enough data for HD video. For Digital Coax audio “speed” is critical not because of how-much how-fast, but because time relationships within a digital stream are critical to the reconstruction of the analog waveform that brings information, music and joy to our ears. Time-based damage (jitter) to this information within the data package makes the sound small and flat instead of 3D, harsh and foggy instead of smooth and clear. \u003ch3\u003eSOLID 0.5% SILVER CONDUCTORS:\u003c\/h3\u003e Solid conductors eliminate strand-interaction distortion and reduce jitter. Solid silver-plated conductors are excellent for very high-frequency applications. These signals, being such a high frequency, travel almost exclusively on the surface of the conductor. As the surface is made of high-purity silver, the performance is very close to that of a solid silver cable, but priced much closer to solid copper cable. This is an incredibly cost effective way of manufacturing very high-quality digital coax cables. \u003ch3\u003eHARD-CELL FOAM INSULATION:\u003c\/h3\u003e Hard-Cell Foam insulation is used exclusively in most of AudioQuest’s video and digital audio cables. Similar to Foamed-PE, it is nitrogen injected to create air pockets. ‘Hard’ foam is used because the stiffness of the material allows the conductors in the cable to maintain the same relationship with each other along the full length of the cable, thus ensuring that the characteristic impedance of the cable is consistent. \u003ch3\u003e100% SHIELD COVERAGE (FOIL + TINNED BRAID):\u003c\/h3\u003e Shielding always plays an important role in any cable design, but the shield on coax interconnect plays an especially important role because it functions not only as a shield but a return path as well. Because of this, AudioQuest pays special attention to the shield’s metal quality and the fabrication techniques as both will affect the sound and the picture. \u003ch3\u003eMETAL-LAYER NOISE-DISSIPATION SYSTEM (NDS):\u003c\/h3\u003e 100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Noise-Dissipation System prevents a significant amount of RFI from reaching the equipment’s ground plane. \u003ch3\u003eTERMINATIONS:\u003c\/h3\u003e Cold-Welded, Gold-Plated","brand":"AudioQuest","offers":[{"title":"0.75M","offer_id":49950441472357,"sku":"FOREST DIGITAL-COAX-0.75M","price":66.95,"currency_code":"CAD","in_stock":true},{"title":"1.5M","offer_id":49950441505125,"sku":"FOREST DIGITAL-COAX-1.5M","price":79.95,"currency_code":"CAD","in_stock":true},{"title":"3M","offer_id":49950441537893,"sku":"FOREST DIGITAL-COAX-3M","price":109.95,"currency_code":"CAD","in_stock":true},{"title":"5M","offer_id":49950441570661,"sku":"FOREST DIGITAL-COAX-5M","price":149.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/audioquest-forest-coaxial-digital-cable.jpg?v=1763413689"},{"product_id":"audioquest-cinnamon-digital-coax","title":"AudioQuest Cinnamon Coaxial Digital Cable","description":"AudioQuest Digital Coax cables are designed to minimize distortion across an extremely wide bandwidth. For many applications, the speed of digital communication is important. Most visibly, “speed” is about transferring large files as quickly as possible, or carrying enough data for HD video. For Digital Coax audio “speed” is critical not because of how-much how-fast, but because time relationships within a digital stream are critical to the reconstruction of the analog waveform that brings information, music and joy to our ears. Time-based damage (jitter) to this information within the data package makes the sound small and flat instead of 3D, harsh and foggy instead of smooth and clear. \u003ch3\u003eSOLID 1.25% SILVER CONDUCTORS:\u003c\/h3\u003e Solid conductors eliminate strand-interaction distortion and reduce jitter. Solid silver-plated conductors are excellent for very high-frequency applications. These signals, being such a high frequency, travel almost exclusively on the surface of the conductor. As the surface is made of high-purity silver, the performance is very close to that of a solid silver cable, but priced much closer to solid copper cable. This is an incredibly cost effective way of manufacturing very high-quality digital coax cables. \u003ch3\u003eHARD-CELL FOAM INSULATION:\u003c\/h3\u003e Hard-Cell Foam insulation is used exclusively in most of AudioQuest’s video and digital audio cables. Similar to Foamed-PE, it is nitrogen injected to create air pockets. ‘Hard’ foam is used because the stiffness of the material allows the conductors in the cable to maintain the same relationship with each other along the full length of the cable, thus ensuring that the characteristic impedance of the cable is consistent. \u003ch3\u003e100% SHIELD COVERAGE (FOIL + SILVER-PLATED BRAID):\u003c\/h3\u003e Shielding always plays an important role in any cable design, but the shield on coax interconnect plays an especially important role because it functions not only as a shield but a return path as well. Because of this, AudioQuest pays special attention to the shield’s metal quality and the fabrication techniques as both will affect the sound and the picture. \u003ch3\u003eMETAL-LAYER NOISE-DISSIPATION SYSTEM (NDS):\u003c\/h3\u003e 100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Noise-Dissipation System prevents a significant amount of RFI from reaching the equipment’s ground plane. \u003ch3\u003eTERMINATIONS:\u003c\/h3\u003e Cold-Welded, Gold-Plated","brand":"AudioQuest","offers":[{"title":"0.75M","offer_id":49950441800037,"sku":"CINNAMON DIGITAL-COAX-0.75M","price":159.95,"currency_code":"CAD","in_stock":true},{"title":"1.5M","offer_id":49950441832805,"sku":"CINNAMON DIGITAL-COAX-1.5M","price":189.95,"currency_code":"CAD","in_stock":true},{"title":"3M","offer_id":49950441865573,"sku":"CINNAMON DIGITAL-COAX-3M","price":239.95,"currency_code":"CAD","in_stock":true},{"title":"5M","offer_id":49950441898341,"sku":"CINNAMON DIGITAL-COAX-5M","price":319.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/audioquest-cinnamon-coaxial-digital-cable.jpg?v=1763413688"},{"product_id":"audioquest-coffee-digital-coax","title":"AudioQuest Coffee Coaxial Digital Cable with 72v DBS","description":"AudioQuest Digital Coax cables are designed to minimize distortion across an extremely wide bandwidth. For many applications, the speed of digital communication is important. Most visibly, “speed” is about transferring large files as quickly as possible, or carrying enough data for HD video. For Digital Coax audio “speed” is critical not because of how-much how-fast, but because time relationships within a digital stream are critical to the reconstruction of the analog waveform that brings information, music and joy to our ears. Time-based damage (jitter) to this information within the data package makes the sound small and flat instead of 3D, harsh and foggy instead of smooth and clear. \u003ch3\u003eSOLID 10% SILVER CONDUCTORS:\u003c\/h3\u003e Solid conductors eliminate strand-interaction distortion and reduce jitter. Solid silver-plated conductors are excellent for very high-frequency applications. These signals, being such a high frequency, travel almost exclusively on the surface of the conductor. As the surface is made of high-purity silver, the performance is very close to that of a solid silver cable, but priced much closer to solid copper cable. This is an incredibly cost effective way of manufacturing very high-quality digital coax cables. \u003ch3\u003eHARD-CELL FOAM INSULATION:\u003c\/h3\u003e Hard-Cell Foam insulation is used exclusively in most of AudioQuest’s video and digital audio cables. Similar to Foamed-PE, it is nitrogen injected to create air pockets. ‘Hard’ foam is used because the stiffness of the material allows the conductors in the cable to maintain the same relationship with each other along the full length of the cable, thus ensuring that the characteristic impedance of the cable is consistent. \u003ch3\u003e100% SHIELD COVERAGE (FOIL + SILVER-PLATED BRAID):\u003c\/h3\u003e Shielding always plays an important role in any cable design, but the shield on coax interconnect plays an especially important role because it functions not only as a shield but a return path as well. Because of this, AudioQuest pays special attention to the shield’s metal quality and the fabrication techniques as both will affect the sound and the picture. \u003ch3\u003e72V DIELECTRIC-BIAS SYSTEM (DBS, US Pat #s 7,126,055 \u0026amp; 7,872,195 B1):\u003c\/h3\u003e All insulation slows down the signal on the conductor inside. When insulation is unbiased, it slows down parts of the signal differently, a big problem for very time-sensitive multi-octave audio. AudioQuest’s DBS creates a strong, stable electrostatic field which saturates and polarizes (organizes) the molecules of the insulation. This minimizes both energy storage in the insulation and the multiple nonlinear time-delays that occur. Sound appears from a surprisingly black background with unexpected detail and dynamic contrast. The DBS battery packs will last for years. A test button and LED allow for the occasional battery check. \u003ch3\u003eCARBON-BASED 6-LAYER NOISE-DISSIPATION SYSTEM (NDS):\u003c\/h3\u003e 100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Metal and Carbon-Loaded synthetics prevent most RFI from reaching the equipment’s ground plane. \u003ch3\u003eTERMINATIONS:\u003c\/h3\u003e Cold-Welded, Hanging-Silver directly over pure Red Copper.","brand":"AudioQuest","offers":[{"title":"0.75M","offer_id":49950441931109,"sku":"COFFEE DIGITAL-COAX-0.75M","price":995.0,"currency_code":"CAD","in_stock":true},{"title":"1.5M","offer_id":49950441996645,"sku":"COFFEE DIGITAL-COAX-1.5M","price":1265.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/audioquest-coffee-coaxial-digital-cable-with-72v-dbs.jpg?v=1763413689"},{"product_id":"audioquest-carbon-digital-coax","title":"AudioQuest Carbon Coaxial Digital Cable","description":"AudioQuest Digital Coax cables are designed to minimize distortion across an extremely wide bandwidth. For many applications, the speed of digital communication is important. Most visibly, “speed” is about transferring large files as quickly as possible, or carrying enough data for HD video. For Digital Coax audio “speed” is critical not because of how-much how-fast, but because time relationships within a digital stream are critical to the reconstruction of the analog waveform that brings information, music and joy to our ears. Time-based damage (jitter) to this information within the data package makes the sound small and flat instead of 3D, harsh and foggy instead of smooth and clear. \u003ch3\u003eSOLID 5% SILVER CONDUCTORS:\u003c\/h3\u003e Solid conductors eliminate strand-interaction distortion and reduce jitter. Solid silver-plated conductors are excellent for very high-frequency applications. These signals, being such a high frequency, travel almost exclusively on the surface of the conductor. As the surface is made of high-purity silver, the performance is very close to that of a solid silver cable, but priced much closer to solid copper cable. This is an incredibly cost effective way of manufacturing very high-quality digital coax cables. \u003ch3\u003eHARD-CELL FOAM INSULATION:\u003c\/h3\u003e Hard-Cell Foam insulation is used exclusively in most of AudioQuest’s video and digital audio cables. Similar to Foamed-PE, it is nitrogen injected to create air pockets. ‘Hard’ foam is used because the stiffness of the material allows the conductors in the cable to maintain the same relationship with each other along the full length of the cable, thus ensuring that the characteristic impedance of the cable is consistent. \u003ch3\u003e100% SHIELD COVERAGE (FOIL + SILVER-PLATED BRAID):\u003c\/h3\u003e Shielding always plays an important role in any cable design, but the shield on coax interconnect plays an especially important role because it functions not only as a shield but a return path as well. Because of this, AudioQuest pays special attention to the shield’s metal quality and the fabrication techniques as both will affect the sound and the picture. \u003ch3\u003eCARBON-BASED 5-LAYER NOISE-DISSIPATION SYSTEM (NDS):\u003c\/h3\u003e 100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Metal and Carbon-Loaded synthetics prevent most RFI from reaching the equipment’s ground plane. \u003ch3\u003eTERMINATIONS:\u003c\/h3\u003e Cold-Welded, Hanging-Silver directly over pure Purple Copper.","brand":"AudioQuest","offers":[{"title":"0.75M","offer_id":49950442029413,"sku":"CARBON DIGITAL-COAX-0.75M","price":449.95,"currency_code":"CAD","in_stock":true},{"title":"1.5M","offer_id":49950442094949,"sku":"CARBON DIGITAL-COAX-1.5M","price":554.95,"currency_code":"CAD","in_stock":true},{"title":"3M","offer_id":49950442160485,"sku":"CARBON DIGITAL-COAX-3M","price":764.95,"currency_code":"CAD","in_stock":true},{"title":"5M","offer_id":49950442193253,"sku":"CARBON DIGITAL-COAX-5M","price":1044.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/audioquest-carbon-coaxial-digital-cable.jpg?v=1763413688"},{"product_id":"audioquest-chicago-rca","title":"Audioquest Chicago RCA Analog-Audio Interconnect Cables (Pair)","description":"\u003cp\u003eEvery March 17 on St. Patrick’s Day, New York City merely paints a green line down the center of its Fifth Avenue parade route—a stunt easily pulled off by any city—but only Chicago dyes an entire river the perfect shade of emerald green to honor Irish culture. Why green? Thanks to Ireland’s lush vegetation, the island is often lovingly referred to as the Emerald Isle. To the Irish, a green display of pride is not to be taken lightly. In the United States, even those of non-Irish descent know to wear green clothing on St. Patrick’s Day, or else be playfully pinched by an Irish friend or colleague! But it’s one thing to don a green shirt or tie, another thing altogether to transform a 156-mile long river. Chicago’s Stephen M. Bailey, the man who orchestrated the transformation, boasted that he’d turn the River Chicago into the River Shannon (Ireland’s longest) for a day, and, eventually, he did.\u003c\/p\u003e \u003cp\u003eThere was no specific recipe for successfully dyeing a river. A bit of trial and error was required. Initially, over 100 pounds of dye was used, and the river stayed green for a week! In the second year, 50 pounds of dye kept the river green for three full days. In the third year, it was found that using 25 pounds of dye would turn the river green for a single day. Two years later, environmental concerns led to the formation of a new vegetable-based dye that produces a perfect sea of green and lasts for four or five hours—40 pounds of the stuff does the trick. Following suit across the nation, major canals, minor creeks, city blocks, drinking fountains, and even the Presidential Fountain at the White House are dyed green for St. Patrick’s Day—all thanks to the wonderful example set in Chicago.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSOLID LONG-GRAIN COPPER (LGC) CONDUCTORS:\u003c\/strong\u003e Solid conductors eliminate strand-interaction distortion. Chicago’s solid Long-Grain Copper allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. OFHC is a general metal industry specification regarding “loss” without any concern for distortion. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNITROGEN-INJECTED HARD-CELL FOAM INSULATION:\u003c\/strong\u003e Nitrogen-Injected Hard-Cell Foam insulation is used exclusively in most of AudioQuest’s video and digital audio cables. Similar to Foamed-PE, it is nitrogen-injected to create air pockets. ‘Hard’ foam is used because the stiffness of the material allows the conductors in the cable to maintain the same relationship with each other along the full length of the cable, thus ensuring that the characteristic impedance of the cable is consistent.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eMETAL-LAYER NOISE-DISSIPATION SYSTEM (NDS):\u003c\/strong\u003e 100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Noise-Dissipation System prevents a significant amount of RFI from reaching the equipment’s ground plane.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDOUBLE-BALANCED GEOMETRY:\u003c\/strong\u003e Two ideal audio conductors separate from the cable’s shield. Not only does this prevent the shield from being used as an inferior audio path, but it further optimizes sound quality by only grounding the shield at one end, reducing system ground-plane modulation.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCOLD-WELDED GOLD-PLATED PLUGS:\u003c\/strong\u003e This plug design allows for a connection devoid of solder, which is a common source of distortion. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of machinability.\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"0.5M","offer_id":49950442226021,"sku":"CHICAGO-RCA-0.5M","price":202.45,"currency_code":"CAD","in_stock":true},{"title":"0.75M","offer_id":49950442258789,"sku":"CHICAGO-RCA-0.75M","price":211.2,"currency_code":"CAD","in_stock":true},{"title":"1M","offer_id":49950442291557,"sku":"CHICAGO-RCA-1M","price":219.95,"currency_code":"CAD","in_stock":true},{"title":"1.5M","offer_id":49950442324325,"sku":"CHICAGO-RCA-1.5M","price":237.45,"currency_code":"CAD","in_stock":true},{"title":"2M","offer_id":49950442357093,"sku":"CHICAGO-RCA-2M","price":254.95,"currency_code":"CAD","in_stock":true},{"title":"3M","offer_id":49950442389861,"sku":"CHICAGO-RCA-3M","price":289.95,"currency_code":"CAD","in_stock":true},{"title":"5M","offer_id":49950442422629,"sku":"CHICAGO-RCA-5M","price":359.95,"currency_code":"CAD","in_stock":true},{"title":"6M","offer_id":49950442455397,"sku":"CHICAGO-RCA-6M","price":394.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/audioquest-chicago-rca-analog-audio-interconnect-cables.jpg?v=1763413688"},{"product_id":"audioquest-red-river-rca","title":"Audioquest Red River RCA Analog-Audio Interconnect Cables (Pair)","description":"\u003cp\u003eNorth America has two Red Rivers, North and South. Red River South has been home to many peoples; it once was the border between the US and colonial Spain, and today forms part of the border between the rival states of Texas and Oklahoma.\u003c\/p\u003e \u003cp\u003eRed River North forms in a confluence of rivers in North Dakota and Minnesota, but its history is Canada’s. The Red River North’s early settlers were the Métis, whose ancestry was French and aboriginal Canadian. The Métis in 1869 began an uprising known as the Red River Rebellion, which challenged the Canadian government, eventually leading to the formation of the province of Manitoba.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSOLID LONG-GRAIN COPPER (LGC) CONDUCTORS:\u003c\/strong\u003e Solid conductors eliminate strand-interaction distortion. Red River’s solid Long-Grain Copper allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. OFHC is a general metal industry specification regarding “loss” without any concern for distortion. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNITROGEN-INJECTED HARD-CELL FOAM INSULATION:\u003c\/strong\u003e Nitrogen-Injected Hard-Cell Foam insulation is used exclusively in most of AudioQuest’s video and digital audio cables. Similar to Foamed-PE, it is nitrogen-injected to create air pockets. ‘Hard’ foam is used because the stiffness of the material allows the conductors in the cable to maintain the same relationship with each other along the full length of the cable, thus ensuring that the characteristic impedance of the cable is consistent.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eMETAL-LAYER NOISE-DISSIPATION SYSTEM (NDS):\u003c\/strong\u003e 100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Noise-Dissipation System prevents a significant amount of RFI from reaching the equipment’s ground plane.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTRIPLE-BALANCED GEOMETRY:\u003c\/strong\u003e The three conductors in “Triple-Balanced” Red River cables ensure that whether prepared with RCA or XLR plugs, the positive and negative signals have equally low-distortion conducting paths. The 100% coverage shield is never used as an inferior conductor.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCOLD-WELDED GOLD-PLATED PLUGS:\u003c\/strong\u003e This plug design allows for a connection devoid of solder, which is a common source of distortion. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of machinability.\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"0.5M","offer_id":49950442488165,"sku":"RED-RIVER-0.5-RCA","price":364.95,"currency_code":"CAD","in_stock":true},{"title":"0.75M","offer_id":49950442520933,"sku":"RED-RIVER-0.75-RCA","price":382.45,"currency_code":"CAD","in_stock":true},{"title":"1M","offer_id":49950442553701,"sku":"RED-RIVER-1-RCA","price":399.95,"currency_code":"CAD","in_stock":true},{"title":"1.5M","offer_id":49950442586469,"sku":"RED-RIVER-1.5-RCA","price":434.95,"currency_code":"CAD","in_stock":true},{"title":"2M","offer_id":49950442619237,"sku":"RED-RIVER-2-RCA","price":469.95,"currency_code":"CAD","in_stock":true},{"title":"3M","offer_id":49950442652005,"sku":"RED-RIVER-3-RCA","price":539.95,"currency_code":"CAD","in_stock":true},{"title":"4M","offer_id":49950442684773,"sku":"RED-RIVER-4-RCA","price":609.95,"currency_code":"CAD","in_stock":true},{"title":"5M","offer_id":49950442717541,"sku":"RED-RIVER-5-RCA","price":679.95,"currency_code":"CAD","in_stock":true},{"title":"6M","offer_id":49950442750309,"sku":"RED-RIVER-6-RCA","price":749.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/audioquest-red-river-rca-analog-audio-interconnect-cables.jpg?v=1763413689"},{"product_id":"audioquest-red-river-xlr","title":"Audioquest Red River XLR Analog-Audio Interconnect Cables (Pair)","description":"\u003cdiv class=\"product-desc-content\"\u003e\n\u003cdiv itemprop=\"description\"\u003e\n\u003cp\u003eNorth America has two Red Rivers, North and South. Red River South has been home to many peoples; it once was the border between the US and colonial Spain, and today forms part of the border between the rival states of Texas and Oklahoma.\u003c\/p\u003e\n\u003cp\u003eRed River North forms in a confluence of rivers in North Dakota and Minnesota, but its history is Canada’s. The Red River North’s early settlers were the Métis, whose ancestry was French and aboriginal Canadian. The Métis in 1869 began an uprising known as the Red River Rebellion, which challenged the Canadian government, eventually leading to the formation of the province of Manitoba.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSOLID LONG-GRAIN COPPER (LGC) CONDUCTORS:\u003c\/strong\u003e Solid conductors eliminate strand-interaction distortion. Red River’s solid Long-Grain Copper allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. OFHC is a general metal industry specification regarding “loss” without any concern for distortion. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNITROGEN-INJECTED HARD-CELL FOAM INSULATION:\u003c\/strong\u003e Nitrogen-Injected Hard-Cell Foam insulation is used exclusively in most of AudioQuest’s video and digital audio cables. Similar to Foamed-PE, it is nitrogen-injected to create air pockets. ‘Hard’ foam is used because the stiffness of the material allows the conductors in the cable to maintain the same relationship with each other along the full length of the cable, thus ensuring that the characteristic impedance of the cable is consistent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMETAL-LAYER NOISE-DISSIPATION SYSTEM (NDS):\u003c\/strong\u003e 100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Noise-Dissipation System prevents a significant amount of RFI from reaching the equipment’s ground plane.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTRIPLE-BALANCED GEOMETRY:\u003c\/strong\u003e The three conductors in “Triple-Balanced” Red River cables ensure that whether prepared with RCA or XLR plugs, the positive and negative signals have equally low-distortion conducting paths. The 100% coverage shield is never used as an inferior conductor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOLD-WELDED GOLD-PLATED PLUGS:\u003c\/strong\u003e This plug design allows for a connection devoid of solder, which is a common source of distortion. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of machinability.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"AudioQuest","offers":[{"title":"0.5M","offer_id":49950442783077,"sku":"RED-RIVER-0.5-XLR","price":489.95,"currency_code":"CAD","in_stock":true},{"title":"0.75M","offer_id":49950442815845,"sku":"RED-RIVER-0.75-XLR","price":509.95,"currency_code":"CAD","in_stock":true},{"title":"1M","offer_id":49950442848613,"sku":"RED-RIVER-1-XLR","price":529.95,"currency_code":"CAD","in_stock":true},{"title":"1.5M","offer_id":49950442881381,"sku":"RED-RIVER-1.5-XLR","price":569.95,"currency_code":"CAD","in_stock":true},{"title":"2M","offer_id":49950442914149,"sku":"RED-RIVER-2-XLR","price":609.95,"currency_code":"CAD","in_stock":true},{"title":"3M","offer_id":49950442946917,"sku":"RED-RIVER-3-XLR","price":689.95,"currency_code":"CAD","in_stock":true},{"title":"4M","offer_id":49950442979685,"sku":"RED-RIVER-4-XLR","price":769.95,"currency_code":"CAD","in_stock":true},{"title":"5M","offer_id":49950443012453,"sku":"RED-RIVER-5-XLR","price":849.95,"currency_code":"CAD","in_stock":true},{"title":"6M","offer_id":49950443045221,"sku":"RED-RIVER-6-XLR","price":929.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/audioquest-red-river-xlr-analog-audio-interconnect-cables.jpg?v=1763413688"},{"product_id":"audioquest-mackenzie-rca","title":"Audioquest Mackenzie RCA Analog-Audio Interconnect Cables (Pair)","description":"\u003cp\u003eOriginally named Disappointment for dashing Alexander Mackenzie’s hope that it would lead to the Pacific rather than the Arctic Ocean, the Mackenzie River is Canada’s largest, longest river system. Traversing 2,635 miles, it flows through a vast network of lakes, boreal forests and arctic tundra. Mackenzie’s many tributaries cover portions of three provinces—British Columbia, Alberta, and Saskatchewan—and two territories, Yukon and the Northwest Territories. Known as “The Amazon of the North,” Mackenzie’s sparsely populated basin remains one of the great unspoiled natural areas in the world.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSOLID PERFECT-SURFACE COPPER+ (PSC+) CONDUCTORS:\u003c\/strong\u003e Perfect-Surface Copper+ has an astonishingly smooth and pure surface. Proprietary metal-processing technology protects the wire’s surface at every stage of drawing and fabrication. When high-purity low-oxide copper is kept as soft, pure and smooth as possible, it becomes a wonderfully low-distortion PSC+ conductor. PSC+ is manufactured by applying the same exceptional technology to an ultra-pure copper. The resulting sound quality is even more focused and simply less in the way. For over 30 years AudioQuest has pioneered the use of superior metals; yet even we were surprised by the huge leap in performance made possible with Perfect-Surface Technology. PSC+ simply outperforms all previously available copper metals at any price. All of Mackenzie’s conductors are solid. Electrical and magnetic interaction between strands in a conventional cable is the greatest source of distortion, often causing a somewhat dirty, harsh sound. Solid conductors are fundamental toward achieving Mackenzie’s very clean sound.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNITROGEN-INJECTED HARD-CELL FOAM INSULATION:\u003c\/strong\u003e Nitrogen-Injected Hard-Cell Foam insulation is used exclusively in most of AudioQuest’s video and digital audio cables. Similar to Foamed-PE, it is nitrogen-injected to create air pockets. ‘Hard’ foam is used because the stiffness of the material allows the conductors in the cable to maintain the same relationship with each other along the full length of the cable, thus ensuring that the characteristic impedance of the cable is consistent.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCARBON-BASED 3-LAYER NOISE-DISSIPATION SYSTEM (NDS):\u003c\/strong\u003e 100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Metal and Carbon-Loaded synthetics prevent most RFI from reaching the equipment’s ground plane.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTRIPLE-BALANCED GEOMETRY:\u003c\/strong\u003e The three conductors in “Triple-Balanced” Mackenzie cables ensure that whether prepared with RCA or XLR plugs, the positive and negative signals have equally low-distortion conducting paths. The 100% coverage shield is never used as an inferior conductor.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCOLD-WELDED HANGING-SILVER DIRECTLY OVER PURE PURPLE COPPER PLUGS:\u003c\/strong\u003e This plug design allows for a connection devoid of solder, which is a common source of distortion. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of machinability. Purple Copper offers a cleaner, clearer sound than the nickel-plated or OFHC metals commonly found in competing manufacturers’ plugs.\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"0.5M","offer_id":49950443077989,"sku":"MACKENZIE-0.5-RCA","price":519.95,"currency_code":"CAD","in_stock":true},{"title":"0.75M","offer_id":49950443110757,"sku":"MACKENZIE-0.75-RCA","price":544.95,"currency_code":"CAD","in_stock":true},{"title":"1M","offer_id":49950443143525,"sku":"MACKENZIE-1-RCA","price":569.95,"currency_code":"CAD","in_stock":true},{"title":"1.5M","offer_id":49950443176293,"sku":"MACKENZIE-1.5-RCA","price":619.95,"currency_code":"CAD","in_stock":true},{"title":"2M","offer_id":49950443209061,"sku":"MACKENZIE-2-RCA","price":669.95,"currency_code":"CAD","in_stock":true},{"title":"3M","offer_id":49950443241829,"sku":"MACKENZIE-3-RCA","price":769.95,"currency_code":"CAD","in_stock":true},{"title":"4M","offer_id":49950443274597,"sku":"MACKENZIE-4-RCA","price":869.95,"currency_code":"CAD","in_stock":true},{"title":"5M","offer_id":49950443307365,"sku":"MACKENZIE-5-RCA","price":969.95,"currency_code":"CAD","in_stock":true},{"title":"6M","offer_id":49950443340133,"sku":"MACKENZIE-6-RCA","price":1269.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/audioquest-mackenzie-rca-analog-audio-interconnect-cables.jpg?v=1763413688"},{"product_id":"audioquest-vodka-optical","title":"Audioquest Vodka Optical Digital-Audio Cable","description":"\u003cul\u003e \u003cli\u003e217 Narrow-Aperture Synthetic Fibers\u003c\/li\u003e \u003cli\u003eLow-Jitter (Digital Timing Errors)\u003c\/li\u003e \u003cli\u003ePrecision Polished Fiber Ends\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eThe audio frontier is all abuzz these days with the pleasure possible though HDMI, USB, FireWire® and Ethernet connections. However, these current generation digital technologies are only part of the story, just as the challenge of designing, manufacturing and choosing the best analog interconnects and speaker cables is as important as ever. The S\/P-DIF (Sony® Philips Digital InterFace), which arrived in 1983 along with the CD, is still very much a part of our world today. S\/P-DIF is transmitted through Digital Coax and Toslink fiber optics (EIA-J), making them still some of the most important cables in electronic entertainment.\u003c\/p\u003e \u003cp\u003eWhile, thanks to HDMI, Toslink is not so often used to connect a DVD player to an A\/V receiver, Toslink connectors are common on cable-boxes, TV sets, subwoofers, all sorts of products. And now, the 3.5mm Mini Optical connector, also somewhat incorrectly known as Mini-Toslink, is everywhere … from the 3.5mm dual-purpose headphone jack on a Mac laptop, to inputs on some of the finest portables.\u003c\/p\u003e \u003cp\u003eFor these many reasons, AudioQuest has refined and renewed our line of serious high performance OptiLink cables. All models and all lengths are now available Toslink to Toslink and Toslink to 3.5mm Mini Optical.\u003c\/p\u003e \u003cp\u003eWhen the question is “how can a fiber-optic cable change the sound?” … the answer is easier to explain than for almost any other type of cable. If the light source were a coherent laser, firing into a vacuum, all the light would stay straight, arriving at its destination at the same time. Even if the LED light source in a Toslink system were coherent, the light entering a fiber-optic cable is scattered and dispersed by imperfections and impurities in the fiber. This can be measured as a loss of amplitude … but amplitude is not the problem, a 50% true loss would have no effect on sound quality.\u003c\/p\u003e \u003cp\u003eThe problem is that the dispersed light does get through the cable, but only after it has taken a longer path, like a pool ball bouncing off the side-rails, causing it to arrive later. This delayed part of the signal prevents the computer charged with decoding this information from being able to decode properly, or even at all. The inability to decode shows first at higher frequencies (not audio frequencies, this is a mono stream of digital audio information), so reduced bandwidth is a measurable signature of light being dispersed by a fiber. The punch line: The less dispersion in the fiber, the less distortion in the final analog audio signal presented to our ears.\u003c\/p\u003e \u003cp\u003eThere is another serious dispersal mechanism in the Toslink system. The fiber is a relatively huge 1.0mm in diameter, and the LED light source is also relatively large, spraying light into the fiber at many different angles. Even if the fiber were absolutely perfect, the signal would be spread across time because light rays entering at different angles take different length paths and arrives with different amounts of delay.\u003c\/p\u003e \u003cp\u003eThe almost complete solution to this problem is to use hundreds of much smaller fibers in a 1.0mm bundle. Because each fiber is limited as to what angle of input can enter the fiber, there is far less variety, and far less dispersion over time. This narrow-aperture effect is similar to how a pin-hole camera can take a picture without a lens … by letting in light at only a very limited range of angles, a picture can be taken, whereas removing the lens from a wider aperture would make photography impossible. Less light gets through a multi-fiber cable, but the light that does get into the fibers comes out within in a much smaller time-envelope.\u003c\/p\u003e \u003cp\u003eSo there is one problem, the dispersion of light across time … and two avenues towards a better result: less dispersion in the fiber (better polymers and ultimately quartz), and less dispersion by filtering the input angle. How simple is that! Listen and enjoy.\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"0.75M","offer_id":49950443372901,"sku":"VODKA OPTICAL-0.75M","price":479.95,"currency_code":"CAD","in_stock":true},{"title":"1.5M","offer_id":49950443405669,"sku":"VODKA OPTICAL-1.5M","price":589.95,"currency_code":"CAD","in_stock":true},{"title":"3M","offer_id":49950443438437,"sku":"VODKA OPTICAL-3M","price":819.95,"currency_code":"CAD","in_stock":true},{"title":"5M","offer_id":49950443471205,"sku":"VODKA OPTICAL-5M","price":1099.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/cable_30-1.jpg?v=1763413688"},{"product_id":"audioquest-g2-30ft","title":"Audioquest G2 Unterminated Speaker Cable - 30FT","description":"\u003cp\u003eAudioQuest’s Flat Series speaker cable is built around a Semi-Solid Concentric design. While this is not as transparent as AudioQuest’s Solid-Core Conductors, Semi-Solid wire is significantly more resolved than conventional stranded bundle wire.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSEMI-SOLID CONCENTRIC PACKED CONDUCTORS: \u003c\/strong\u003eSemi-Solid Concentric Packed Conductors are used in some of AudioQuest’s AC power and speaker cables as a cost-effective, flexible alternative to typical stranded conductors. Semi-Solid Concentric Packed Conductors use fewer, larger strands that do not change position down the length of the cable. While solid conductors are the complete solution to strand distortion, Semi-Solid Concentric Packed Conductors avoid many of the distortion mechanisms of stranded conductors.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eLONG-GRAIN COPPER (LGC): \u003c\/strong\u003eLGC allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. OFHC is a general metal industry specification regarding “loss” without any concern for distortion. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance. G-2 cables use LGC strands in a Semi-Solid Concentric Packed Conductor arrangement.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSPREAD-SPECTRUM TECHNOLOGY (SST): \u003c\/strong\u003eAny single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid or tubular) have the fewest discontinuities, any conductor of a particular size does have a sonic signature. SST is a method for significantly reducing the awareness of these character flaws by using a precise combination of different size conductors.\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"White","offer_id":49950443602277,"sku":"G2-30FT WHT","price":99.95,"currency_code":"CAD","in_stock":true},{"title":"Grey","offer_id":49950443635045,"sku":"G2-30FT GREY","price":99.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/audioquest-g2-unterminated-speaker-cable-30ft-white.jpg?v=1763413688"},{"product_id":"audioquest-g2-50ft","title":"Audioquest G2 Unterminated Speaker Cable - 50FT","description":"\u003cp\u003eAudioQuest’s Flat Series speaker cable is built around a Semi-Solid Concentric design. While this is not as transparent as AudioQuest’s Solid-Core Conductors, Semi-Solid wire is significantly more resolved than conventional stranded bundle wire.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSEMI-SOLID CONCENTRIC PACKED CONDUCTORS: \u003c\/strong\u003eSemi-Solid Concentric Packed Conductors are used in some of AudioQuest’s AC power and speaker cables as a cost-effective, flexible alternative to typical stranded conductors. Semi-Solid Concentric Packed Conductors use fewer, larger strands that do not change position down the length of the cable. While solid conductors are the complete solution to strand distortion, Semi-Solid Concentric Packed Conductors avoid many of the distortion mechanisms of stranded conductors.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eLONG-GRAIN COPPER (LGC): \u003c\/strong\u003eLGC allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. OFHC is a general metal industry specification regarding “loss” without any concern for distortion. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance. G-2 cables use LGC strands in a Semi-Solid Concentric Packed Conductor arrangement.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSPREAD-SPECTRUM TECHNOLOGY (SST): \u003c\/strong\u003eAny single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid or tubular) have the fewest discontinuities, any conductor of a particular size does have a sonic signature. SST is a method for significantly reducing the awareness of these character flaws by using a precise combination of different size conductors.\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"White","offer_id":49950443667813,"sku":"G2-50FT WHT","price":164.97,"currency_code":"CAD","in_stock":true},{"title":"Grey","offer_id":49950443700581,"sku":"G2-50FT GREY","price":164.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/audioquest-g2-unterminated-speaker-cable-100ft-w.jpg?v=1763413688"},{"product_id":"audioquest-g2-100ft","title":"Audioquest G2 Unterminated Speaker Cable - 100FT","description":"\u003cp\u003eAudioQuest’s Flat Series speaker cable is built around a Semi-Solid Concentric design. While this is not as transparent as AudioQuest’s Solid-Core Conductors, Semi-Solid wire is significantly more resolved than conventional stranded bundle wire.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSEMI-SOLID CONCENTRIC PACKED CONDUCTORS: \u003c\/strong\u003eSemi-Solid Concentric Packed Conductors are used in some of AudioQuest’s AC power and speaker cables as a cost-effective, flexible alternative to typical stranded conductors. Semi-Solid Concentric Packed Conductors use fewer, larger strands that do not change position down the length of the cable. While solid conductors are the complete solution to strand distortion, Semi-Solid Concentric Packed Conductors avoid many of the distortion mechanisms of stranded conductors.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eLONG-GRAIN COPPER (LGC): \u003c\/strong\u003eLGC allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. OFHC is a general metal industry specification regarding “loss” without any concern for distortion. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance. G-2 cables use LGC strands in a Semi-Solid Concentric Packed Conductor arrangement.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSPREAD-SPECTRUM TECHNOLOGY (SST): \u003c\/strong\u003eAny single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid or tubular) have the fewest discontinuities, any conductor of a particular size does have a sonic signature. SST is a method for significantly reducing the awareness of these character flaws by using a precise combination of different size conductors.\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"White","offer_id":49950443733349,"sku":"G2-100FT WHT","price":329.95,"currency_code":"CAD","in_stock":true},{"title":"Grey","offer_id":49950443766117,"sku":"G2-100FT GREY","price":329.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/audioquest-g2-unterminated-speaker-cable-100ft-white.jpg?v=1763413688"},{"product_id":"audioquest-x2-30ft","title":"Audioquest X2 Unterminated Speaker Cable - 30FT","description":"\u003cp\u003eAudioQuest’s Flat Series speaker cable is built around a Semi-Solid Concentric design. While this is not as transparent as AudioQuest’s Solid-Core Conductors, Semi-Solid wire is significantly more resolved than conventional stranded bundle wire.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSEMI-SOLID CONCENTRIC PACKED CONDUCTORS: \u003c\/strong\u003eSemi-Solid Concentric Packed Conductors are used in some of AudioQuest’s AC power and speaker cables as a cost-effective, flexible alternative to typical stranded conductors. Semi-Solid Concentric Packed Conductors use fewer, larger strands that do not change position down the length of the cable. While solid conductors are the complete solution to strand distortion, Semi-Solid Concentric Packed Conductors avoid many of the distortion mechanisms of stranded conductors.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eLONG-GRAIN COPPER (LGC): \u003c\/strong\u003eLGC allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. OFHC is a general metal industry specification regarding “loss” without any concern for distortion. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance. X2 cables use LGC strands in a Semi-Solid Concentric Packed Conductor arrangement.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSPREAD-SPECTRUM TECHNOLOGY (SST): \u003c\/strong\u003eAny single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid or tubular) have the fewest discontinuities, any conductor of a particular size does have a sonic signature. SST is a method for significantly reducing the awareness of these character flaws by using a precise combination of different size conductors.\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"White","offer_id":49950443798885,"sku":"X2-30FT WHT","price":143.95,"currency_code":"CAD","in_stock":true},{"title":"Grey","offer_id":49950443831653,"sku":"X2-30FT GREY","price":143.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/audioquest-x2-unterminated-speaker-cable-30ft-w.jpg?v=1763413688"},{"product_id":"audioquest-x2-50ft","title":"Audioquest X2 Unterminated Speaker Cable - 50FT","description":"\u003cp\u003eAudioQuest’s Flat Series speaker cable is built around a Semi-Solid Concentric design. While this is not as transparent as AudioQuest’s Solid-Core Conductors, Semi-Solid wire is significantly more resolved than conventional stranded bundle wire.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSEMI-SOLID CONCENTRIC PACKED CONDUCTORS: \u003c\/strong\u003eSemi-Solid Concentric Packed Conductors are used in some of AudioQuest’s AC power and speaker cables as a cost-effective, flexible alternative to typical stranded conductors. Semi-Solid Concentric Packed Conductors use fewer, larger strands that do not change position down the length of the cable. While solid conductors are the complete solution to strand distortion, Semi-Solid Concentric Packed Conductors avoid many of the distortion mechanisms of stranded conductors.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eLONG-GRAIN COPPER (LGC): \u003c\/strong\u003eLGC allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. OFHC is a general metal industry specification regarding “loss” without any concern for distortion. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance. X2 cables use LGC strands in a Semi-Solid Concentric Packed Conductor arrangement.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSPREAD-SPECTRUM TECHNOLOGY (SST): \u003c\/strong\u003eAny single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid or tubular) have the fewest discontinuities, any conductor of a particular size does have a sonic signature. SST is a method for significantly reducing the awareness of these character flaws by using a precise combination of different size conductors.\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"White","offer_id":49950443864421,"sku":"X2-50FT WHT","price":239.98,"currency_code":"CAD","in_stock":true},{"title":"Grey","offer_id":49950443897189,"sku":"X2-50FT GREY","price":239.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/audioquest-x2-unterminated-speaker-cable-50ft-white.jpg?v=1763413688"},{"product_id":"audioquest-x2-100ft","title":"Audioquest X2 Unterminated Speaker Cable - 100FT","description":"\u003cp\u003eAudioQuest’s Flat Series speaker cable is built around a Semi-Solid Concentric design. While this is not as transparent as AudioQuest’s Solid-Core Conductors, Semi-Solid wire is significantly more resolved than conventional stranded bundle wire.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSEMI-SOLID CONCENTRIC PACKED CONDUCTORS: \u003c\/strong\u003eSemi-Solid Concentric Packed Conductors are used in some of AudioQuest’s AC power and speaker cables as a cost-effective, flexible alternative to typical stranded conductors. Semi-Solid Concentric Packed Conductors use fewer, larger strands that do not change position down the length of the cable. While solid conductors are the complete solution to strand distortion, Semi-Solid Concentric Packed Conductors avoid many of the distortion mechanisms of stranded conductors.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eLONG-GRAIN COPPER (LGC): \u003c\/strong\u003eLGC allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. OFHC is a general metal industry specification regarding “loss” without any concern for distortion. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance. X2 cables use LGC strands in a Semi-Solid Concentric Packed Conductor arrangement.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSPREAD-SPECTRUM TECHNOLOGY (SST): \u003c\/strong\u003eAny single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid or tubular) have the fewest discontinuities, any conductor of a particular size does have a sonic signature. SST is a method for significantly reducing the awareness of these character flaws by using a precise combination of different size conductors.\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"White","offer_id":49950443929957,"sku":"X2-100FT WHT","price":479.95,"currency_code":"CAD","in_stock":true},{"title":"Grey","offer_id":49950443962725,"sku":"X2-100FT GREY","price":479.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/Audioquest-x2-unterminated-speaker-cable-100-ft.jpg?v=1758641173"},{"product_id":"golden-golden-gate-rca-rca","title":"Audioquest Golden Gate Analog-Audio Interconnect Cable RCA to RCA","description":"\u003cp\u003eThe nearly magical confluence of land and sea where the San Francisco Peninsula reaching up from the south, and Marin County stretching down from the north, almost touch, was named “Chrysopylea,” meaning “golden gate,” by Captain John C. Fremont in 1846. The Golden Gate Bridge was the longest suspension bridge in the world from 1937 to 1964, when New York City’s Verrazano Narrows surpassed it by a mere 18 meters (60 ft). The main span is 1,280 meters (4,200 ft) long and 27 meters (90 ft) wide, the towers rise to 227 meters (746 ft) above the water.\u003c\/p\u003e \u003ch3\u003eSOLID PERFECT-SURFACE COPPER (PSC) CONDUCTORS:\u003c\/h3\u003e \u003cp\u003ePerfect-Surface Copper has an astonishingly smooth and pure surface. Proprietary metal-processing technology protects the wire’s surface at every stage of drawing and fabrication. When high-purity low-oxide copper is kept as soft, pure and smooth as possible, it becomes a wonderfully low-distortion conductor. For over 30 years AudioQuest has pioneered the use of superior metals; yet even we were surprised by this huge leap in performance. PSC clearly outperforms previous AQ metals that cost over ten times as much. Electrical and magnetic interaction between strands in a conventional cable is the greatest source of distortion, often causing a somewhat dirty, harsh sound. Solid conductors are fundamental toward achieving Golden Gate’s very clean sound.\u003c\/p\u003e \u003ch3\u003eFOAMED-POLYETHYLENE INSULATION:\u003c\/h3\u003e \u003cp\u003eAny solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy (loss). Some of this energy is stored and then released as distortion. Golden Gate uses air-filled Foamed-Polyethylene Insulation on both conductors because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.\u003c\/p\u003e \u003ch3\u003eMETAL-LAYER NOISE-DISSIPATION SYSTEM (NDS):\u003c\/h3\u003e \u003cp\u003e100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Noise-Dissipation System prevents a significant amount of RFI from reaching the equipment’s ground plane.\u003c\/p\u003e \u003ch3\u003eASYMMETRICAL DOUBLE-BALANCED GEOMETRY:\u003c\/h3\u003e \u003cp\u003ePurpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.\u003c\/p\u003e \u003ch3\u003eCOLD-WELDED GOLD-PLATED RCA PLUGS:\u003c\/h3\u003e \u003cp\u003eThis plug design allows for a connection devoid of solder, which is a common source of distortion. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of machinability.\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"0.6M","offer_id":49950443995493,"sku":"GOLDEN GATE RCA-RCA 0.6M","price":192.35,"currency_code":"CAD","in_stock":true},{"title":"1M","offer_id":49950444028261,"sku":"GOLDEN GATE RCA-RCA 1M","price":205.95,"currency_code":"CAD","in_stock":true},{"title":"1.5M","offer_id":49950444061029,"sku":"GOLDEN GATE RCA-RCA 1.5M","price":222.95,"currency_code":"CAD","in_stock":true},{"title":"2M","offer_id":49950444093797,"sku":"GOLDEN GATE RCA-RCA 2M","price":239.95,"currency_code":"CAD","in_stock":true},{"title":"3M","offer_id":49950444126565,"sku":"GOLDEN GATE RCA-RCA 3M","price":273.95,"currency_code":"CAD","in_stock":true},{"title":"5M","offer_id":49950444159333,"sku":"GOLDEN GATE RCA-RCA 5M","price":341.95,"currency_code":"CAD","in_stock":true},{"title":"8M","offer_id":49950444192101,"sku":"GOLDEN GATE RCA-RCA 8M","price":443.95,"currency_code":"CAD","in_stock":true},{"title":"12M","offer_id":49950444224869,"sku":"GOLDEN GATE RCA-RCA 12M","price":579.95,"currency_code":"CAD","in_stock":true},{"title":"16M","offer_id":49950444257637,"sku":"GOLDEN GATE RCA-RCA 16M","price":715.95,"currency_code":"CAD","in_stock":true},{"title":"20M","offer_id":49950444290405,"sku":"GOLDEN GATE RCA-RCA 20M","price":851.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/Audioquest-golden-gate-analog-audio-interconnect-cable-rca-to-rca.jpg?v=1758640879"},{"product_id":"audioquest-cinnamon-optical","title":"Audioquest Cinnamon Optical Digital-Audio Cable","description":"\u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eLower-Dispersion Higher-Purity Fiber\u003c\/li\u003e \u003cli\u003eLow-Jitter (Digital Timing Errors)\u003c\/li\u003e \u003cli\u003ePrecision Polished Fiber Ends\u003c\/li\u003e \u003cli\u003e3 meter and above In-Wall Rated PVC\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eThe audio frontier is all abuzz these days with the pleasure possible though HDMI, USB, FireWire® and Ethernet connections. However, these current generation digital technologies are only part of the story, just as the challenge of designing, manufacturing and choosing the best analog interconnects and speaker cables is as important as ever. The S\/P-DIF (Sony® Philips Digital InterFace), which arrived in 1983 along with the CD, is still very much a part of our world today. S\/P-DIF is transmitted through Digital Coax and Toslink fiber optics (EIA-J), making them still some of the most important cables in electronic entertainment.\u003c\/p\u003e \u003cp\u003eWhile, thanks to HDMI, Toslink is not so often used to connect a DVD player to an A\/V receiver, Toslink connectors are common on cable-boxes, TV sets, subwoofers, all sorts of products. And now, the 3.5mm Mini Optical connector, also somewhat incorrectly known as Mini-Toslink, is everywhere … from the 3.5mm dual-purpose headphone jack on a Mac laptop, to inputs on some of the finest portables.\u003c\/p\u003e \u003cp\u003eFor these many reasons, AudioQuest has refined and renewed our line of serious high performance OptiLink cables. All models and all lengths are now available Toslink to Toslink and Toslink to 3.5mm Mini Optical.\u003c\/p\u003e \u003cp\u003eWhen the question is “how can a fiber-optic cable change the sound?” … the answer is easier to explain than for almost any other type of cable. If the light source were a coherent laser, firing into a vacuum, all the light would stay straight, arriving at its destination at the same time. Even if the LED light source in a Toslink system were coherent, the light entering a fiber-optic cable is scattered and dispersed by imperfections and impurities in the fiber. This can be measured as a loss of amplitude … but amplitude is not the problem, a 50% true loss would have no effect on sound quality.\u003c\/p\u003e \u003cp\u003eThe problem is that the dispersed light does get through the cable, but only after it has taken a longer path, like a pool ball bouncing off the side-rails, causing it to arrive later. This delayed part of the signal prevents the computer charged with decoding this information from being able to decode properly, or even at all. The inability to decode shows first at higher frequencies (not audio frequencies, this is a mono stream of digital audio information), so reduced bandwidth is a measurable signature of light being dispersed by a fiber. The punch line: The less dispersion in the fiber, the less distortion in the final analog audio signal presented to our ears.\u003c\/p\u003e \u003cp\u003eThere is another serious dispersal mechanism in the Toslink system. The fiber is a relatively huge 1.0mm in diameter, and the LED light source is also relatively large, spraying light into the fiber at many different angles. Even if the fiber were absolutely perfect, the signal would be spread across time because light rays entering at different angles take different length paths and arrives with different amounts of delay.\u003c\/p\u003e \u003cp\u003eThe almost complete solution to this problem is to use hundreds of much smaller fibers in a 1.0mm bundle. Because each fiber is limited as to what angle of input can enter the fiber, there is far less variety, and far less dispersion over time. This narrow-aperture effect is similar to how a pin-hole camera can take a picture without a lens … by letting in light at only a very limited range of angles, a picture can be taken, whereas removing the lens from a wider aperture would make photography impossible. Less light gets through a multi-fiber cable, but the light that does get into the fibers comes out within in a much smaller time-envelope.\u003c\/p\u003e \u003cp\u003eSo there is one problem, the dispersion of light across time … and two avenues towards a better result: less dispersion in the fiber (better polymers and ultimately quartz), and less dispersion by filtering the input angle. How simple is that! Listen and enjoy.\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"0.75M","offer_id":49950444323173,"sku":"CINNAMON-OPTICAL-0.75M","price":139.95,"currency_code":"CAD","in_stock":true},{"title":"1.5M","offer_id":49950444355941,"sku":"CINNAMON-OPTICAL-1.5M","price":179.95,"currency_code":"CAD","in_stock":true},{"title":"3M","offer_id":49950444388709,"sku":"CINNAMON-OPTICAL-3M","price":189.95,"currency_code":"CAD","in_stock":true},{"title":"5M","offer_id":49950444421477,"sku":"CINNAMON-OPTICAL-5M","price":259.95,"currency_code":"CAD","in_stock":true},{"title":"8M","offer_id":49950444454245,"sku":"CINNAMON-OPTICAL-8M","price":379.95,"currency_code":"CAD","in_stock":true},{"title":"12M","offer_id":49950444487013,"sku":"CINNAMON-OPTICAL-12M","price":549.95,"currency_code":"CAD","in_stock":true},{"title":"16M","offer_id":49950444519781,"sku":"CINNAMON-OPTICAL-16M","price":799.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/Audioquest-cinnamon-optical-digital-audio-cable.jpg?v=1758640744"},{"product_id":"audioquest-carbon-optical","title":"Audioquest Carbon Optical Digital-Audio Cable","description":"\u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e19 Narrow-Aperture Synthetic Fibers\u003c\/li\u003e \u003cli\u003eLow-Jitter (Digital Timing Errors)\u003c\/li\u003e \u003cli\u003ePrecision Polished Fiber Ends\u003c\/li\u003e \u003cli\u003e3 meter and above In-Wall Rated PVC\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eThe audio frontier is all abuzz these days with the pleasure possible though HDMI, USB, FireWire® and Ethernet connections. However, these current generation digital technologies are only part of the story, just as the challenge of designing, manufacturing and choosing the best analog interconnects and speaker cables is as important as ever. The S\/P-DIF (Sony® Philips Digital InterFace), which arrived in 1983 along with the CD, is still very much a part of our world today. S\/P-DIF is transmitted through Digital Coax and Toslink fiber optics (EIA-J), making them still some of the most important cables in electronic entertainment.\u003c\/p\u003e \u003cp\u003eWhile, thanks to HDMI, Toslink is not so often used to connect a DVD player to an A\/V receiver, Toslink connectors are common on cable-boxes, TV sets, subwoofers, all sorts of products. And now, the 3.5mm Mini Optical connector, also somewhat incorrectly known as Mini-Toslink, is everywhere … from the 3.5mm dual-purpose headphone jack on a Mac laptop, to inputs on some of the finest portables.\u003c\/p\u003e \u003cp\u003eFor these many reasons, AudioQuest has refined and renewed our line of serious high performance OptiLink cables. All models and all lengths are now available Toslink to Toslink and Toslink to 3.5mm Mini Optical.\u003c\/p\u003e \u003cp\u003eWhen the question is “how can a fiber-optic cable change the sound?” … the answer is easier to explain than for almost any other type of cable. If the light source were a coherent laser, firing into a vacuum, all the light would stay straight, arriving at its destination at the same time. Even if the LED light source in a Toslink system were coherent, the light entering a fiber-optic cable is scattered and dispersed by imperfections and impurities in the fiber. This can be measured as a loss of amplitude … but amplitude is not the problem, a 50% true loss would have no effect on sound quality.\u003c\/p\u003e \u003cp\u003eThe problem is that the dispersed light does get through the cable, but only after it has taken a longer path, like a pool ball bouncing off the side-rails, causing it to arrive later. This delayed part of the signal prevents the computer charged with decoding this information from being able to decode properly, or even at all. The inability to decode shows first at higher frequencies (not audio frequencies, this is a mono stream of digital audio information), so reduced bandwidth is a measurable signature of light being dispersed by a fiber. The punch line: The less dispersion in the fiber, the less distortion in the final analog audio signal presented to our ears.\u003c\/p\u003e \u003cp\u003eThere is another serious dispersal mechanism in the Toslink system. The fiber is a relatively huge 1.0mm in diameter, and the LED light source is also relatively large, spraying light into the fiber at many different angles. Even if the fiber were absolutely perfect, the signal would be spread across time because light rays entering at different angles take different length paths and arrives with different amounts of delay.\u003c\/p\u003e \u003cp\u003eThe almost complete solution to this problem is to use hundreds of much smaller fibers in a 1.0mm bundle. Because each fiber is limited as to what angle of input can enter the fiber, there is far less variety, and far less dispersion over time. This narrow-aperture effect is similar to how a pin-hole camera can take a picture without a lens … by letting in light at only a very limited range of angles, a picture can be taken, whereas removing the lens from a wider aperture would make photography impossible. Less light gets through a multi-fiber cable, but the light that does get into the fibers comes out within in a much smaller time-envelope.\u003c\/p\u003e \u003cp\u003eSo there is one problem, the dispersion of light across time … and two avenues towards a better result: less dispersion in the fiber (better polymers and ultimately quartz), and less dispersion by filtering the input angle. How simple is that! Listen and enjoy.\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"0.75M","offer_id":49950444552549,"sku":"CARBON-OPTICAL-0.75M","price":229.95,"currency_code":"CAD","in_stock":true},{"title":"1.5M","offer_id":49950444585317,"sku":"CARBON-OPTICAL-1.5M","price":319.95,"currency_code":"CAD","in_stock":true},{"title":"3M","offer_id":49950444618085,"sku":"CARBON-OPTICAL-3M","price":479.95,"currency_code":"CAD","in_stock":true},{"title":"5M","offer_id":49950444650853,"sku":"CARBON-OPTICAL-5M","price":709.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/Audioquest-carbon-optical-digital-audio-cable.jpg?v=1758575018"},{"product_id":"audioquest-tower-rca-rca","title":"Audioquest Tower Analog-Audio Interconnect RCA to RCA Cable","description":"\u003cp\u003eNote: All cables in our Bridges \u0026amp; Falls Series place their left and right channels in a single jacket, and feature our Asymmetrical Double-Balanced geometry with separate high-quality positive and negative conductors. This design allows for a thin, flexible, and uniquely versatile high-performance cable that can be terminated with a variety of today’s connections, including 3.5mm (male or female), DIN, and RCA. In Bridges \u0026amp; Falls, you’ll find better metals and more sophisticated technologies — including Air-Tube insulation, Dielectric-Bias System, and Noise-Dissipation System — at lower prices than ever before. Do keep in mind, however, that, by necessity, the plugs on Bridges \u0026amp; Falls cables are fairly close together. If the L and R inputs of your components are more than 3″ (7.6cm) apart, please consider models from our Rivers or Elements Series.\u003c\/p\u003e \u003cp\u003eThe image of London’s dramatic Tower Bridge is so famous that it is often mistakenly thought of as London Bridge. Tower Bridge, completed in 1894, is an unusual combination of suspension bridges on the land side of the towers, and dual bascule spans in the center. As with the many bascule bridges in St. Petersburg, Russia and over the Chicago River, moving this weight-balanced roadway requires comparatively little energy, making it very efficient for allowing river traffic to pass. Tower Bridge’s original hydraulic accumulators were a significant advance in storing the energy required to be able to open the two 1,000 ton bascules in only five minutes.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSOLID LONG-GRAIN COPPER (LGC) CONDUCTORS:\u003c\/strong\u003e Solid conductors eliminate strand-interaction distortion. Evergreen’s solid Long-Grain Copper allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. OFHC is a general metal industry specification regarding “loss” without any concern for distortion. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFOAMED-POLYETHYLENE INSULATION:\u003c\/strong\u003e Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy (loss). Some of this energy is stored and then released as distortion. Tower uses air-filled Foamed-Polyethylene Insulation on both conductors because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eMETAL-LAYER NOISE-DISSIPATION SYSTEM (NDS):\u003c\/strong\u003e 100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Noise-Dissipation System prevents a significant amount of RFI from reaching the equipment’s ground plane.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eASYMMETRICAL DOUBLE-BALANCED GEOMETRY:\u003c\/strong\u003e Purpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCOLD-WELDED, GOLD-PLATED TERMINATIONS:\u003c\/strong\u003e This plug design allows for a connection devoid of solder, which is a common source of distortion. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of machinability.\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"0.6M","offer_id":49950444683621,"sku":"TOWER RCA-RCA-0.6M","price":71.95,"currency_code":"CAD","in_stock":true},{"title":"1M","offer_id":50210055684453,"sku":"TOWER RCA 1M","price":79.95,"currency_code":"CAD","in_stock":true},{"title":"2M","offer_id":49950444781925,"sku":"TOWER RCA-RCA-2M","price":99.95,"currency_code":"CAD","in_stock":true},{"title":"3M","offer_id":49950444814693,"sku":"TOWER RCA-RCA-3M","price":119.95,"currency_code":"CAD","in_stock":true},{"title":"5M","offer_id":49950444847461,"sku":"TOWER RCA-RCA-5M","price":159.95,"currency_code":"CAD","in_stock":true},{"title":"8M","offer_id":49950444880229,"sku":"TOWER RCA-RCA-8M","price":219.95,"currency_code":"CAD","in_stock":true},{"title":"12M","offer_id":49950444912997,"sku":"TOWER RCA-RCA-12M","price":299.95,"currency_code":"CAD","in_stock":true},{"title":"16M","offer_id":49950444945765,"sku":"TOWER RCA-RCA-16M","price":379.95,"currency_code":"CAD","in_stock":true},{"title":"20M","offer_id":49950444978533,"sku":"TOWER RCA-RCA-20M","price":459.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/Audioquest-tower-analog-audio-interconnect-rca-rca-cable.jpg?v=1758574928"},{"product_id":"audioquest-dragonfly-black","title":"Audioquest DragonFly Black USB DAC, PreAmp and Headphone Amp","description":"New firmware now available. Visit Audioquest to download \u003cul\u003e \u003cli\u003eUSB Stick-Sized Digital-to-Analog Converter\u003c\/li\u003e \u003cli\u003eMedium-Output (1.2 volt)\u003c\/li\u003e \u003cli\u003ePlays All Music Files: MP3 to High-Resolution\u003c\/li\u003e \u003cli\u003eDrives Headphones Directly\u003c\/li\u003e \u003cli\u003eVariable Output Drives Powered Speakers or Power Amp\u003c\/li\u003e \u003cli\u003eFixed Output Feeds Preamp or Receiver\u003c\/li\u003e \u003cli\u003eAsynchronous Transfer Ensures Digital Timing Integrity\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eBeautiful Sound from Any Mobile Device or Computer\u003c\/h2\u003e \u003cp\u003eWith an increasingly large variety of websites and applications from which to choose, we have far greater access to music and movies than ever before. Mobile phones, tablets, laptops, and computers can all serve as gateways to this ever-expanding universe of audio and video content. Unfortunately, these wonderful devices are not specifically designed to perform as high-fidelity audio source components because they lack the quality of parts and sophisticated circuitry that would allow them to preserve valuable musical data.\u003c\/p\u003e \u003cp\u003eWhether connected to an Apple® or Windows® PC, or an iOS® or Android® device, DragonFly bypasses the device’s compromised audio circuitry to deliver beautiful sound to earbuds, headphones, desktop speakers, or complete audio systems, allowing the smart device to perform as a true high-fidelity audio source.\u003c\/p\u003e \u003cp\u003eNow far more versatile and portable than ever before, DragonFly Black lets you hear all the emotional expression and nuance that makes your favorite music and movies so enjoyable.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCapabilities\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePlays all music files: MP3 to High-Res\u003c\/li\u003e \u003cli\u003eCompatible with Apple® and Windows® PCs\u003c\/li\u003e \u003cli\u003eCompatible with iOS devices (requires Apple Camera Adapter\/Connection Kit)\u003c\/li\u003e \u003cli\u003eCompatible with Android devices (requires USB Adaptor For Android™ Devices)\u003c\/li\u003e \u003cli\u003eDrives a wide range of moderate- to high-efficiency headphones\u003c\/li\u003e \u003cli\u003eAnalog variable output drives powered speakers or power amp\u003c\/li\u003e \u003cli\u003eFixed output feeds preamp or AV receiver\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e64-position (digitally controlled) analog volume control\u003c\/li\u003e \u003cli\u003eAsynchronous Class 1 USB data transfer using the Streamlength™ protocol*\u003c\/li\u003e \u003cli\u003eDirect-coupled digital-to-analog circuitry\u003c\/li\u003e \u003cli\u003eMinimum-Phase Digital Filter for more naturally detailed, dynamic music\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cem\u003e* DragonFly Black’s Streamlength™ asynchronous USB code ensures low jitter, low resource load, minimal packet errors, world-class audio playback, and reliable connectivity between our DAC and any computing device compliant with USB Host Mode (as set forth by the USB Organization). Streamlength® requires no additional drivers, making DF Black virtually plug-and-play for Apple, Windows, iOS, and Android users.\u003c\/em\u003e\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"Default Title","offer_id":49950451958117,"sku":"DRAGONFLY-BLACK","price":169.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/Audioquest-Dragonfly-Black-usb-dac-Preamp-and-Headphone-Amp.jpg?v=1758574786"},{"product_id":"audioquest-fog-lifters","title":"Audioquest Fog Lifters (Set of 8)","description":"\u003cp\u003eFeatures:\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePlace an absolute minimum of solid material in direct contact with the cable\u003c\/li\u003e \u003cli\u003eReduce the RF noise that capacitively couples into cables through all solid materials (carpet, stone, wood, etc.)\u003c\/li\u003e \u003cli\u003ePreserve low-level audio signals\u003c\/li\u003e \u003cli\u003eFor use with audio and AC power cables\u003c\/li\u003e \u003cli\u003eEach package includes 8 Fog Lifters\u003c\/li\u003e \u003cli\u003eDimensions: 5.6” x 5.6” (footprint); 6.25” (height)\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eFor four decades, AudioQuest has stated as clearly as possible, that pretty much all audio improvements come from reducing “damage”—either by preserving the original information or by not adding misinformation.\u003cbr\u003e \u003cbr\u003e AudioQuest’s Fog Lifters work so well because of how effectively they address a significant source of misinformation—Radio-Frequency Noise coupled from the floor into audio and AC cables.\u003cbr\u003e \u003cbr\u003e A carpet or wood floor, not to mention a concrete floor, might not at first seem like a source of RF Noise, but in fact RF energy is all around us and always wants to go wherever it can find a lower energy state.\u003cbr\u003e \u003cbr\u003e Think of lightning or static electricity, especially in winter. You don’t think of yourself as an energy source, but dry heated air can make it painfully obvious that there’s an energy differential between you and the things you touch. That’s not an exact analogy, but very close.\u003cbr\u003e \u003cbr\u003e Fog Lifters significantly reduce RF coupling, whether with the floor, or due to misdirected efforts to isolate cable with stands or clamps that themselves have too much mass and are sources of RF Noise.\u003cbr\u003e \u003cbr\u003e A few inches or centimeters might not seem important, but as with light coming from a bulb, the energy falls off exponentially. A few inches or centimeters makes a big difference—which translates into a lower noise-floor and less compromise to, and distortion in, attached active circuits.\u003cbr\u003e \u003cbr\u003e If you’re thinking “my cables are shielded, so there is no noise problem,” you’re partially correct—but at the high frequencies we’re bathed in thanks to cellular, Wi-Fi, etc., conventional shielding does not stop RF Noise from being capacitively coupled into signal-carrying conductors—not to mention that the shield itself is drained to a ground plane, which is in a sense as sensitive as the signal because “signal” is the difference between signal and ground.\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"Default Title","offer_id":49950452908389,"sku":"FOG LIFTERS","price":199.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/Audioquest-fog-lifters-set-of-8.jpg?v=1758574644"},{"product_id":"audioquest-evergreen-rca-rca","title":"Audioquest Evergreen Analog-Audio Interconnect RCA to RCA Cable","description":"\u003cp\u003eNote: All cables in our Bridges \u0026amp; Falls Series place their left and right channels in a single jacket, and feature our Asymmetrical Double-Balanced geometry with separate high-quality positive and negative conductors. This design allows for a thin, flexible, and uniquely versatile high-performance cable that can be terminated with a variety of today’s connections, including 3.5mm (male or female), DIN, and RCA. In Bridges \u0026amp; Falls, you’ll find better metals and more sophisticated technologies — including Air-Tube insulation, Dielectric-Bias System, and Noise-Dissipation System — at lower prices than ever before. Do keep in mind, however, that, by necessity, the plugs on Bridges \u0026amp; Falls cables are fairly close together. If the L and R inputs of your components are more than 3″ (7.6cm) apart, please consider models from our Rivers or Elements Series.\u003c\/p\u003e \u003cp\u003eThe Evergreen Point Floating Bridge connects Seattle, Washington (USA) to the Bellevue area across Lake Washington. Since opening in 1963, its 2,285 meters (7,497 ft) makes it the longest floating bridge in the world. The structure includes 33 pre-stressed concrete pontoons averaging 110 meters (360 ft) long and 18 meters (60 ft) wide.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSOLID LONG-GRAIN COPPER (LGC) CONDUCTORS:\u003c\/strong\u003e Solid conductors eliminate strand-interaction distortion. Evergreen’s solid Long-Grain Copper allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. OFHC is a general metal industry specification regarding “loss” without any concern for distortion. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFOAMED-POLYETHYLENE INSULATION:\u003c\/strong\u003e Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy (loss). Some of this energy is stored and then released as distortion. Evergreen uses air-filled Foamed-Polyethylene Insulation on both conductors because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eMETAL-LAYER NOISE-DISSIPATION SYSTEM (NDS):\u003c\/strong\u003e 100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Noise-Dissipation System prevents a significant amount of RFI from reaching the equipment’s ground plane.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eASYMMETRICAL DOUBLE-BALANCED GEOMETRY:\u003c\/strong\u003e Purpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCOLD-WELDED, GOLD-PLATED TERMINATIONS:\u003c\/strong\u003e This plug design allows for a connection devoid of solder, which is a common source of distortion. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of machinability.\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"0.6M","offer_id":49950456283493,"sku":"EVERGREEN RCA-RCA-0.6M","price":124.95,"currency_code":"CAD","in_stock":true},{"title":"1M","offer_id":49950456316261,"sku":"EVERGREEN RCA-RCA-1M","price":134.95,"currency_code":"CAD","in_stock":true},{"title":"2M","offer_id":49950456381797,"sku":"EVERGREEN RCA-RCA-2M","price":159.95,"currency_code":"CAD","in_stock":true},{"title":"3M","offer_id":49950456414565,"sku":"EVERGREEN RCA-RCA-3M","price":184.95,"currency_code":"CAD","in_stock":true},{"title":"5M","offer_id":49950456447333,"sku":"EVERGREEN RCA-RCA-5M","price":234.95,"currency_code":"CAD","in_stock":true},{"title":"12M","offer_id":49950456480101,"sku":"EVERGREEN RCA-RCA-12M","price":409.95,"currency_code":"CAD","in_stock":true},{"title":"16M","offer_id":49950456512869,"sku":"EVERGREEN RCA-RCA-16M","price":509.95,"currency_code":"CAD","in_stock":true},{"title":"20M","offer_id":49950456545637,"sku":"EVERGREEN RCA-RCA-20M","price":609.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/Audioquest-Evergreen-analog-audio-interconnect-rca-rca-cable.jpg?v=1758574547"},{"product_id":"audioquest-niagara-5000","title":"Audioquest NIAGARA 5000 Low-Z Power, Noise-Dissipation System","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e90 Amps Peak AC Transient Power Correction (Increased Performance and Current Reservoir for Any Power Amplifier)\u003c\/li\u003e \u003cli\u003eIn Excess of 23 Octaves of Linearized Transverse-Mode (Differential) Filtering\u003c\/li\u003e \u003cli\u003ePatented Ground Noise-Dissipation Technology\u003c\/li\u003e \u003cli\u003eNon-Sacrificial and Sonically Non-Invasive Over-Voltage ShutDown and Transient Surge Suppression\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eThe science of AC power delivery is not a simple one; it demands focus, and the devil is in the details. In fact, the great increase in airborne and AC-line-transmitted radio signals, combined with overtaxed utility lines and the ever-increasing demands from high-definition audio\/video components, has rendered our utilities’ AC power a somewhat antiquated technology.\u003c\/p\u003e \u003cp\u003eWhere Alternating Current (AC) is concerned, we’re relying on a century-old technology created for incandescent lights and electric motors—technology that was certainly never meant to power the sophisticated analog and digital circuits used in today’s premium audio\/video systems. To properly accom-modate the promise of today’s ever-increasing bandwidth and dynamic range, we must achieve extraordinarily low noise across a very wide range of frequencies.\u003c\/p\u003e \u003cp\u003eFurther, today’s power amplifiers are being taxed for instantaneous peak-current demand, even when they’re driven at modest volumes. Although we have seen a substantial increase in dynamics from much of our audio software, the loudspeakers we employ to reproduce them are often no more efficient than they were two to four decades ago. This places great demands on an amplifier’s power supply, as well as the source AC power supplying it.\u003c\/p\u003e \u003cp\u003eOur systems’ sensitive components need better alternating current—a fact that has resulted in a host of AC power conditioning, isolation transformer, regeneration amplifier, and battery back-up system topologies. Through differential sample tests and spectrum analysis, it can be proven that up to a third of a high-resolution (low-level) audio signal can be lost, masked, or highly distorted by the vast levels of noise riding along the AC power lines that feed our components. This noise couples into the signal circuitry as current noise and through AC ground, permanently distorting and\/or masking the source signal.\u003c\/p\u003e \u003cp\u003eGiven that the stakes are so high, all sincere attempts to solve this problem must be applauded.\u003c\/p\u003e \u003cp\u003eOnce the audio\/video signal is gone, it’s gone forever…\u003c\/p\u003e \u003cp\u003eFor AudioQuest, honoring the source is never a matter of simply using premium “audiophile-grade parts” or relying on a proprietary technology—common approaches within our community. For years, we have all been witness to the same, seemingly endless audiophile debates: valves versus transistors; analog versus digital; can cables really make a difference?; and on and on. While we, too, can brag about our many unique technologies, we realize that true audio\/video optimization is never a matter of any one secret or exotic circuit. When it comes to noise filtering for AC power, many approaches can yield meaningful results. However, these approaches may also impart ringing, current compression, and non-linear distortions that can render the cure worse than the disease!\u003c\/p\u003e \u003cp\u003eThe Niagara 5000 features our patented AC Ground Noise- Dissipation System, the widest bandwidth-linearized AC filter in the industry, and our unique passive\/active Transient Power Correction Circuit. Boasting an instantaneous current reservoir of over 90 amps peak, the Niagara 5000 is specifically designed for today’s current-starved power amplifiers. Many AC power products featuring “high-current outlets” merely minimize current compression; the Niagara 5000 corrects it.\u003c\/p\u003e \u003cp\u003eThough it’s easy to tout a given technology, it’s quite another thing to create a solution that is consistent, holistic, functional, and that honors verifiable science. It’s not enough to reduce AC line noise and its associated distortions at just one octave, thus leaving vulnerable the adjacent octaves and octave partials to noise, resonant peaking, or insufficient noise reduction. Consistency is key. We should never accept superior resolution in one octave, only to suffer from masking effects a half-octave away and ringing artifacts two octaves from there. This is the principal criterion for AudioQuest’s Low-Z Power Noise-Dissipation System.\u003c\/p\u003e \u003cp\u003eThe Niagara 5000 represents over 20 years of exhaustive research and proven AC power products designed for audiophiles, broadcast engineers, and professional-audio applications. Every conceivable detail has been addressed: In the Niagara 5000, you’ll find optimized radio-frequency lead directionality, capacitor run-in forming technologies developed by Jet Propulsion Laboratories and NASA, and AC inlet and outlet contacts with heavy silver plating over extreme-purity copper, assuring the tightest grip possible.\u003c\/p\u003e \u003cp\u003eA great system is built from a solid foundation, and that foundation starts with power. With an AudioQuest Niagara 5000, you’ll experience for the first time the clarity, dimensionality, frequency extension, dynamic contrast, and grip your system has always been capable of delivering—if only the power had been right!\u003c\/p\u003e \u003cp\u003eWe welcome you to experience the Niagara 5000 and hear firsthand the remarkable results of highly optimized power management: startlingly deep silences, stunning dynamic freedom, outstanding retrieval of ambience cues, and gorgeous delineation of instruments and musicians in space. Once you’ve experienced it, it may seem so elegant, so logical, and so obvious that you find yourself wondering why it hadn’t been done before.\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"Default Title","offer_id":49950459724133,"sku":"NIAGARA 5000","price":8900.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/Audioquest-Niagara-5000-Low-z-Power-Noise-Dissipation-System.jpg?v=1758574425"},{"product_id":"audioquest-mackenzie-xlr","title":"Audioquest Mackenzie XLR Analog-Audio Interconnect Cables (Pair)","description":"\u003cp\u003eOriginally named Disappointment for dashing Alexander Mackenzie’s hope that it would lead to the Pacific rather than the Arctic Ocean, the Mackenzie River is Canada’s largest, longest river system. Traversing 2,635 miles, it flows through a vast network of lakes, boreal forests and arctic tundra. Mackenzie’s many tributaries cover portions of three provinces—British Columbia, Alberta, and Saskatchewan—and two territories, Yukon and the Northwest Territories. Known as “The Amazon of the North,” Mackenzie’s sparsely populated basin remains one of the great unspoiled natural areas in the world.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSOLID PERFECT-SURFACE COPPER+ (PSC+) CONDUCTORS\u003c\/strong\u003e: Perfect-Surface Copper+ has an astonishingly smooth and pure surface. Proprietary metal-processing technology protects the wire’s surface at every stage of drawing and fabrication. When high-purity low-oxide copper is kept as soft, pure and smooth as possible, it becomes a wonderfully low-distortion PSC+ conductor. PSC+ is manufactured by applying the same exceptional technology to an ultra-pure copper. The resulting sound quality is even more focused and simply less in the way. For over 30 years AudioQuest has pioneered the use of superior metals; yet even we were surprised by the huge leap in performance made possible with Perfect-Surface Technology. PSC+ simply outperforms all previously available copper metals at any price. All of Mackenzie’s conductors are solid. Electrical and magnetic interaction between strands in a conventional cable is the greatest source of distortion, often causing a somewhat dirty, harsh sound. Solid conductors are fundamental toward achieving Mackenzie’s very clean sound.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNITROGEN-INJECTED HARD-CELL FOAM INSULATION\u003c\/strong\u003e: Nitrogen-Injected Hard-Cell Foam insulation is used exclusively in most of AudioQuest’s video and digital audio cables. Similar to Foamed-PE, it is nitrogen-injected to create air pockets. ‘Hard’ foam is used because the stiffness of the material allows the conductors in the cable to maintain the same relationship with each other along the full length of the cable, thus ensuring that the characteristic impedance of the cable is consistent.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCARBON-BASED 3-LAYER NOISE-DISSIPATION SYSTEM (NDS)\u003c\/strong\u003e: 100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Metal and Carbon-Loaded synthetics prevent most RFI from reaching the equipment’s ground plane.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTRIPLE-BALANCED GEOMETRY\u003c\/strong\u003e: The three conductors in “Triple-Balanced” Mackenzie cables ensure that whether prepared with RCA or XLR plugs, the positive and negative signals have equally low-distortion conducting paths. The 100% coverage shield is never used as an inferior conductor.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCOLD-WELDED HANGING-SILVER DIRECTLY OVER PURE PURPLE COPPER PLUGS\u003c\/strong\u003e: This plug design allows for a connection devoid of solder, which is a common source of distortion. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of machinability. Purple Copper offers a cleaner, clearer sound than the nickel-plated or OFHC metals commonly found in competing \u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"0.5M","offer_id":49950461722981,"sku":"MACKENZIE-0.5-XLR","price":649.95,"currency_code":"CAD","in_stock":true},{"title":"0.75M","offer_id":49950461755749,"sku":"MACKENZIE-0.75-XLR","price":679.95,"currency_code":"CAD","in_stock":true},{"title":"1.M","offer_id":49950461788517,"sku":"MACKENZIE-1M-XLR","price":709.95,"currency_code":"CAD","in_stock":true},{"title":"1.5M","offer_id":49950461821285,"sku":"MACKENZIE-1.5M-XLR","price":769.95,"currency_code":"CAD","in_stock":true},{"title":"2M","offer_id":49950461854053,"sku":"MACKENZIE-2M-XLR","price":829.95,"currency_code":"CAD","in_stock":true},{"title":"3M","offer_id":49950461886821,"sku":"MACKENZIE-3M-XLR","price":949.95,"currency_code":"CAD","in_stock":true},{"title":"4M","offer_id":49950461919589,"sku":"MACKENZIE-4M-XLR","price":1069.95,"currency_code":"CAD","in_stock":true},{"title":"5M","offer_id":49950461952357,"sku":"MACKENZIE-5M-XLR","price":1189.95,"currency_code":"CAD","in_stock":true},{"title":"6M","offer_id":49950461985125,"sku":"MACKENZIE-6M-XLR","price":1309.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/Audioquest-Mackenzie-xlr-analog-audio-Interconnect-Cable.jpg?v=1758574244"},{"product_id":"audioquest-tower-3-5-rca","title":"Audioquest Tower Analog-Audio Interconnect 3.5mm to RCA Cable","description":"\u003cp\u003eNote: All cables in our Bridges \u0026amp; Falls Series place their left and right channels in a single jacket, and feature our Asymmetrical Double-Balanced geometry with separate high-quality positive and negative conductors. This design allows for a thin, flexible, and uniquely versatile high-performance cable that can be terminated with a variety of today’s connections, including 3.5mm (male or female), DIN, and RCA. In Bridges \u0026amp; Falls, you’ll find better metals and more sophisticated technologies — including Air-Tube insulation, Dielectric-Bias System, and Noise-Dissipation System — at lower prices than ever before. Do keep in mind, however, that, by necessity, the plugs on Bridges \u0026amp; Falls cables are fairly close together. If the L and R inputs of your components are more than 3″ (7.6cm) apart, please consider models from our Rivers or Elements Series.\u003c\/p\u003e \u003cp\u003eThe image of London’s dramatic Tower Bridge is so famous that it is often mistakenly thought of as London Bridge. Tower Bridge, completed in 1894, is an unusual combination of suspension bridges on the land side of the towers, and dual bascule spans in the center. As with the many bascule bridges in St. Petersburg, Russia and over the Chicago River, moving this weight-balanced roadway requires comparatively little energy, making it very efficient for allowing river traffic to pass. Tower Bridge’s original hydraulic accumulators were a significant advance in storing the energy required to be able to open the two 1,000 ton bascules in only five minutes.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSOLID LONG-GRAIN COPPER (LGC) CONDUCTORS\u003c\/strong\u003e: Solid conductors eliminate strand-interaction distortion. Evergreen’s solid Long-Grain Copper allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. OFHC is a general metal industry specification regarding “loss” without any concern for distortion. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFOAMED-POLYETHYLENE INSULATION\u003c\/strong\u003e: Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy (loss). Some of this energy is stored and then released as distortion. Tower uses air-filled Foamed-Polyethylene Insulation on both conductors because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eMETAL-LAYER NOISE-DISSIPATION SYSTEM (NDS)\u003c\/strong\u003e: 100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Noise-Dissipation System prevents a significant amount of RFI from reaching the equipment’s ground plane.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eASYMMETRICAL DOUBLE-BALANCED GEOMETRY\u003c\/strong\u003e: Purpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCOLD-WELDED, GOLD-PLATED TERMINATIONS\u003c\/strong\u003e: This plug design allows for a connection devoid of solder, which is a common source of distortion. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of machinability.\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"0.6M","offer_id":49950462247269,"sku":"TOWER-3.5-RCA-0.6M","price":71.95,"currency_code":"CAD","in_stock":true},{"title":"1M","offer_id":49950462280037,"sku":"TOWER-3.5-RCA-1M","price":79.95,"currency_code":"CAD","in_stock":true},{"title":"2M","offer_id":49950462345573,"sku":"TOWER-3.5-RCA-2M","price":99.95,"currency_code":"CAD","in_stock":true},{"title":"3M","offer_id":49950462378341,"sku":"TOWER-3.5-RCA-3M","price":119.95,"currency_code":"CAD","in_stock":true},{"title":"5M","offer_id":49950462411109,"sku":"TOWER-3.5-RCA-5M","price":159.95,"currency_code":"CAD","in_stock":true},{"title":"8M","offer_id":49950462443877,"sku":"TOWER-3.5-RCA-8M","price":219.95,"currency_code":"CAD","in_stock":true},{"title":"12M","offer_id":49950462476645,"sku":"TOWER-3.5-RCA-12M","price":299.95,"currency_code":"CAD","in_stock":true},{"title":"16M","offer_id":49950462509413,"sku":"TOWER-3.5-RCA-16M","price":379.95,"currency_code":"CAD","in_stock":true},{"title":"20M","offer_id":49950462542181,"sku":"TOWER-3.5-RCA-20M","price":469.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/Audioquest-Tower-Analog-Audio-Interconnect-3.5mm-to-rca-Cable.jpg?v=1758574128"},{"product_id":"audioquest-diamond-usb-a-b","title":"Audioquest DIAMOND USB A to B with 72v DBS Cable","description":"\u003cp\u003eIn 1982 Sony gave us “Perfect sound forever,” along with the attitude that, “it’s just digital, so all CD players sound the same.” That was disproved and qualitative differences between players became accepted truth. Next came separate transport and DAC combos, which brought with it the attitude that “all S\/PDIF digital audio cables sound the same…” until that too became disproved. Now the frontier has moved once again. Is digital audio really just ones and zeros? We don’t believe so, and once you’ve had a chance to listen to Diamond USB, you won’t think so either…\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSOLID 100% PERFECT-SURFACE SILVER (PSS) CONDUCTORS\u003c\/strong\u003e: Perfect-Surface Technology applied to extreme-purity silver provides unprecedented clarity and dynamic contrast. Solid conductors prevent strand interaction, a major source of cable distortion. Extremely high-purity Perfect-Surface Silver minimizes distortion caused by the grain boundaries that exist within any metal conductor, nearly eliminating harshness and greatly increasing clarity compared to OFHC, OCC, 8N and other coppers.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFOAMED-POLYETHYLENE INSULATION\u003c\/strong\u003e: Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy (loss). Some of this energy is stored and then released as distortion. Diamond USB uses air-filled Foamed-Polyethylene Insulation because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCARBON-BASED 3-LAYER NOISE-DISSIPATION SYSTEM (NDS)\u003c\/strong\u003e: 100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Metal and Carbon-Loaded synthetics prevent most RFI from reaching the equipment’s ground plane.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDIELECTRIC-BIAS SYSTEM (DBS, US Pat #s 7,126,055 \u0026amp; 7,872,195 B1)\u003c\/strong\u003e: All insulation slows down the signal on the conductor inside. When insulation is unbiased, it slows down parts of the signal differently, a big problem for very time-sensitive multi-octave audio. AudioQuest’s DBS creates a strong, stable electrostatic field which saturates and polarizes (organizes) the molecules of the insulation. This minimizes both energy storage in the insulation and the multiple nonlinear time-delays that occur. Sound appears from a surprisingly black background with unexpected detail and dynamic contrast. The DBS battery packs will last for years. A test button and LED allow for the occasional battery check.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTERMINATIONS\u003c\/strong\u003e: Precision direct-silver plated pins are carefully attached with the very best solder. Through choice of flux and metallurgy, AQ solder has been optimized to make a low-distortion connection. The difference you hear between solders is a result of connection quality. AQ Solder does not have a high silver content because the more silver there is in solder, the more difficult it is to make a good connection.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUNIVERSAL SERIAL BUS DEVICE CLASS DEFINITION FOR AUDIO DEVICES\u003c\/strong\u003e: USB (Universal Serial BUS) was established by a stalwart group of companies such as Intel, Hewlett-Packard, and Microsoft (just to name a few) in order to give the personal computing world a truly \u003cem\u003euniversal \u003c\/em\u003estandard and means to connect devices such as hard drives, printers, cameras, and, more importantly to us, audio components. Included in the original description are protocols for the pristine transfer of audio over USB. Great care and sensitivity went into this. Consequently, a computer connected to a USB-enabled digital-to-analog converter can outperform the best compact disc players available today. AudioQuest is committed to contributing products that honor USB’s ability to deliver state-of-the-art performance on this new and wonderful frontier.\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"0.75M","offer_id":49950463132005,"sku":"DIAMOND USB A-B-0.75M","price":1199.95,"currency_code":"CAD","in_stock":true},{"title":"1.5M","offer_id":49950463164773,"sku":"DIAMOND USB A-B-1.5M","price":1399.95,"currency_code":"CAD","in_stock":true},{"title":"3M","offer_id":49950463197541,"sku":"DIAMOND USB A-B-3M","price":1949.95,"currency_code":"CAD","in_stock":true},{"title":"5M","offer_id":49950463230309,"sku":"DIAMOND USB A-B-5M","price":1999.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/Audioquest-diamond-usb-a-to-b-with-72-v-dsb-cable_e3ca50db-0374-44b4-8e9e-9d7eb2ec7fe4.jpg?v=1758574022"},{"product_id":"audioquest-rca-splitters-male-to-female","title":"Audioquest FLX-X RCA Splitters (Male to 2 Female)","description":"\u003cul\u003e \u003cli\u003eMale stereo RCA to 2 x Female RCA\u003c\/li\u003e \u003cli\u003eSolid LGC\u003c\/li\u003e \u003cli\u003eSilver\/White braid (15 cm. – 6 in.)\u003c\/li\u003e \u003c\/ul\u003e","brand":"AudioQuest","offers":[{"title":"Default Title","offer_id":49950463689061,"sku":"RCA SPLITTERS - MALE TO FEMALE","price":31.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/Audioquest-flx-x-rca-splitters-male-to-2-female.jpg?v=1758573822"},{"product_id":"audioquest-rca-splitters-female-to-male","title":"Audioquest FLX-X RCA Splitters (Female to 2 Male)","description":"\u003cul\u003e \u003cli\u003eFemale stereo RCA to 2 x Male RCA\u003c\/li\u003e \u003cli\u003eSolid LGC\u003c\/li\u003e \u003cli\u003eSilver\/White braid (15 cm. – 6 in.)\u003c\/li\u003e \u003c\/ul\u003e","brand":"AudioQuest","offers":[{"title":"Default Title","offer_id":49950463721829,"sku":"RCA SPLITTERS - FEMALE TO MALE","price":31.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/Audioquest-flx-x-rca-splitters-female-to-2-male.jpg?v=1758573703"},{"product_id":"audioquest-tower-3-5","title":"Audioquest Tower Analog-Audio Interconnect 3.5mm to 3.5mm Cable","description":"\u003cp\u003eNote: All cables in our Bridges \u0026amp; Falls Series place their left and right channels in a single jacket, and feature our Asymmetrical Double-Balanced geometry with separate high-quality positive and negative conductors. This design allows for a thin, flexible, and uniquely versatile high-performance cable that can be terminated with a variety of today’s connections, including 3.5mm (male or female), DIN, and RCA. In Bridges \u0026amp; Falls, you’ll find better metals and more sophisticated technologies — including Air-Tube insulation, Dielectric-Bias System, and Noise-Dissipation System — at lower prices than ever before. Do keep in mind, however, that, by necessity, the plugs on Bridges \u0026amp; Falls cables are fairly close together. If the L and R inputs of your components are more than 3″ (7.6cm) apart, please consider models from our Rivers or Elements Series.\u003c\/p\u003e \u003cp\u003eThe image of London’s dramatic Tower Bridge is so famous that it is often mistakenly thought of as London Bridge. Tower Bridge, completed in 1894, is an unusual combination of suspension bridges on the land side of the towers, and dual bascule spans in the center. As with the many bascule bridges in St. Petersburg, Russia and over the Chicago River, moving this weight-balanced roadway requires comparatively little energy, making it very efficient for allowing river traffic to pass. Tower Bridge’s original hydraulic accumulators were a significant advance in storing the energy required to be able to open the two 1,000 ton bascules in only five minutes.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSOLID LONG-GRAIN COPPER (LGC) CONDUCTORS\u003c\/strong\u003e: Solid conductors eliminate strand-interaction distortion. Evergreen’s solid Long-Grain Copper allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. OFHC is a general metal industry specification regarding “loss” without any concern for distortion. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFOAMED-POLYETHYLENE INSULATION\u003c\/strong\u003e: Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy (loss). Some of this energy is stored and then released as distortion. Tower uses air-filled Foamed-Polyethylene Insulation on both conductors because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eMETAL-LAYER NOISE-DISSIPATION SYSTEM (NDS)\u003c\/strong\u003e: 100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Noise-Dissipation System prevents a significant amount of RFI from reaching the equipment’s ground plane.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eASYMMETRICAL DOUBLE-BALANCED GEOMETRY\u003c\/strong\u003e: Purpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCOLD-WELDED, GOLD-PLATED TERMINATIONS\u003c\/strong\u003e: This plug design allows for a connection devoid of solder, which is a common source of distortion. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of machinability.\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"0.6M","offer_id":49950466081125,"sku":"TOWER-3.5-0.6M","price":71.95,"currency_code":"CAD","in_stock":true},{"title":"1M","offer_id":49950466113893,"sku":"TOWER-3.5-1M","price":79.95,"currency_code":"CAD","in_stock":true},{"title":"2M","offer_id":49950466179429,"sku":"TOWER-3.5-2M","price":99.95,"currency_code":"CAD","in_stock":true},{"title":"3M","offer_id":49950466212197,"sku":"TOWER-3.5-3M","price":119.95,"currency_code":"CAD","in_stock":true},{"title":"5M","offer_id":49950466244965,"sku":"TOWER-3.5-5M","price":159.95,"currency_code":"CAD","in_stock":true},{"title":"8M","offer_id":49950466277733,"sku":"TOWER-3.5-8M","price":219.95,"currency_code":"CAD","in_stock":true},{"title":"12M","offer_id":49950466310501,"sku":"TOWER-3.5-12M","price":299.95,"currency_code":"CAD","in_stock":true},{"title":"16M","offer_id":49950466343269,"sku":"TOWER-3.5-16M","price":379.95,"currency_code":"CAD","in_stock":true},{"title":"20M","offer_id":49950466376037,"sku":"TOWER-3.5-20M","price":459.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/Audioquest-Tower-Analog-Audio-Interconnect-3.5mm-to-3.5mm-cable.jpg?v=1758573586"},{"product_id":"audioquest-black-lab","title":"Audioquest Black Lab Subwoofer Cable","description":"\u003cp\u003eContrary to their name, Black Labs’ heritage actually traces back to Newfoundland in the 1700s, when they were first known as “Saint John’s Dogs.” When this large Newfoundland-based breed was mixed with smaller water dogs, the result is the dog now known as the Labrador. Labradors (Black or otherwise) are known for their dedication to duty, their highly developed sense of smell and hearing, and their endless capacity for playing “fetch” (they are “retrievers” after all!). These traits combine to make Labradors excellent service dogs for the handicapped as well as wonderful pets.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSOLID LONG-GRAIN COPPER (LGC) CONDUCTORS\u003c\/strong\u003e: Solid conductors eliminate strand-interaction distortion. Black Lab’s solid Long-Grain Copper allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. OFHC is a general metal industry specification regarding “loss” without any concern for distortion. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFOAMED-POLYETHYLENE INSULATION\u003c\/strong\u003e: Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy (loss). Some of this energy is stored and then released as distortion. Black Lab uses air-filled Foamed-Polyethylene Insulation on both conductors because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eMETAL-LAYER NOISE-DISSIPATION SYSTEM (NDS)\u003c\/strong\u003e: 100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Noise-Dissipation System prevents a significant amount of RFI from reaching the equipment’s ground plane.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSYMMETRICAL COAX GEOMETRY\u003c\/strong\u003e: Identical + and – conductors prevent the shield being used as an inferior audio conductor.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCOLD-WELDED GOLD-PLATED PLUGS\u003c\/strong\u003e: This plug design allows for a connection devoid of solder, which is a common source of distortion. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of machinability.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eGROUNDING\u003c\/strong\u003e: Sometimes there is a hum problem unless the subwoofer and AV receiver (or surround-sound processor) are attached to each other using a separate wire. If your system has a hum problem, try attaching the little spade-lug tails to the metal chassis of the subwoofer amplifier and to the chassis of the sending component. Usually, this extra wire will not be needed.\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"2M","offer_id":49950466539877,"sku":"BLACK LAB - 2M","price":84.95,"currency_code":"CAD","in_stock":true},{"title":"3M","offer_id":49950466572645,"sku":"BLACK LAB - 3M","price":99.95,"currency_code":"CAD","in_stock":true},{"title":"5M","offer_id":49950466605413,"sku":"BLACK LAB - 5M","price":129.95,"currency_code":"CAD","in_stock":true},{"title":"8M","offer_id":49950466638181,"sku":"BLACK LAB - 8M","price":174.95,"currency_code":"CAD","in_stock":true},{"title":"12M","offer_id":49950466670949,"sku":"BLACK LAB - 12M","price":234.95,"currency_code":"CAD","in_stock":true},{"title":"16M","offer_id":49950466703717,"sku":"BLACK LAB - 16M","price":294.95,"currency_code":"CAD","in_stock":true},{"title":"20M","offer_id":49950466736485,"sku":"BLACK LAB - 20M","price":354.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/Audioquest-Black-lab-subwoofer-cable.jpg?v=1758573287"},{"product_id":"audioquest-q2-10ft","title":"Audioquest Q2 BFA Speaker Wire - 10FT (Sold as a Pair)","description":"\u003cp\u003eAudioQuest’s Flat Series speaker cable is built around a Semi-Solid Concentric design. While this is not as transparent as AudioQuest’s Solid-Core Conductors, Semi-Solid wire is significantly more resolved than conventional stranded bundle wire.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eLong-Grain Copper\u003c\/strong\u003e: Long-Grain Copper (LGC) has fewer grain boundarieswithin the conductor than standard Oxygen-Free High-Conductivity copper. Less internal junctions enable outstanding clarity and naturalness.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSolid+ Concentric Conductors\u003c\/strong\u003e: Solid conductors prevent two very common sources of distortion: imperfect strand-to-strand contacts and magnetic interaction between strands. However, if a conductor as large as in Q2 was a single solid, not only would it be very stiff, but, due to skin effect, it would also have a very unnatural sound—like an aural roller coaster. Q2’s Solid+ Concentric Conductors comprise a perfect circle of 11 smaller strands of LGC copper spiraled around a single larger strand of LGC. The result is a flexible conductor with sound quality approaching that of an ideal solid conductor.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eLow-Inductance Twisted-Pair Geometry\u003c\/strong\u003e: A normal speaker cable with parallel conductors has fairly high inductance, smearing energy across time and making the sound dull and unfocused. The two conductors in Q2 cable are spiraled around one another, providing lower inductance, greater clarity, and superior bass-to-treble frequency extension.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCold-Welded Direct-Silver Plated BFA\/Bananas\u003c\/strong\u003e: AudioQuest’s SureGrip 100 BFA\/Banana plugs allow Q2 to be easily and securely attached to almost any type of amplifier or loudspeaker. We are proud of the dull but superior-sounding finish on these plugs. Most plugs get their shiny look from a barrier layer of nickel over the underlying material (usually brass). SG100 plugs have highpurity silver plated directly over the superior beryllium-copper plug. While gold adds a slight softening to the sound, thick silver plating actually provides superior clarity versus an unplated part: The copper is protected and the sound is improved! Over time, it is possible you will see some dark silver tarnish. These oxides are as conductive as untarnished silver, but the tarnish is also easily removed with standard silver cleaner.\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"Default Title","offer_id":49950466867557,"sku":"Q2-10FT","price":389.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/Audioquest-Q2-bfa-speaker-wire-10ft.jpg?v=1758573202"},{"product_id":"audioquest-big-sur-rca","title":"Audioquest BIG SUR Analog-Audio Interconnect RCA to RCA Cable","description":"\u003cp\u003eNote: All cables in our Bridges \u0026amp; Falls Series place their left and right channels in a single jacket, and feature our Asymmetrical Double-Balanced geometry with separate high-quality positive and negative conductors. This design allows for a thin, flexible, and uniquely versatile high-performance cable that can be terminated with a variety of today’s connections, including 3.5mm (male or female), DIN, and RCA. In Bridges \u0026amp; Falls, you’ll find better metals and more sophisticated technologies — including Air-Tube insulation, Dielectric-Bias System, and Noise-Dissipation System — at lower prices than ever before. Do keep in mind, however, that, by necessity, the plugs on Bridges \u0026amp; Falls cables are fairly close together. If the L and R inputs of your components are more than 3″ (7.6cm) apart, please consider models from our Rivers or Elements Series.\u003c\/p\u003e \u003cp\u003eSpanning a creek and a formidable travel-impeding canyon, the Bixby Creek Bridge compliments and counterpoints the majestic beauty of California’s spectacular coastline just north of Big Sur, 190km (120 miles) south of San Francisco. As an integral part of this stretch of landscape, the bridge has been featured in numerous TV shows and movies, and is seen on travel posters all over the world\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSOLID PERFECT-SURFACE COPPER+ (PSC+) CONDUCTORS\u003c\/strong\u003e: Perfect-Surface Copper+ has an astonishingly smooth and pure surface. Proprietary metal-processing technology protects the wire’s surface at every stage of drawing and fabrication. When high-purity low-oxide copper is kept as soft, pure and smooth as possible, it becomes a wonderfully low-distortion PSC+ conductor. PSC+ is manufactured by applying the same exceptional technology to an ultra-pure copper. The resulting sound quality is even more focused and simply less in the way. For over 30 years AudioQuest has pioneered the use of superior metals; yet even we were surprised by the huge leap in performance made possible with Perfect-Surface Technology. PSC+ simply outperforms all previously available copper metals at any price. All of Big Sur’s conductors are solid. Electrical and magnetic interaction between strands in a conventional cable is the greatest source of distortion, often causing a somewhat dirty, harsh sound. Solid conductors are fundamental toward achieving Big Sur’s very clean sound.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFOAMED-POLYETHYLENE INSULATION\u003c\/strong\u003e: Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy (loss). Some of this energy is stored and then released as distortion. Big Sur uses air-filled Foamed-Polyethylene Insulation on both conductors because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eMETAL-LAYER NOISE-DISSIPATION SYSTEM (NDS)\u003c\/strong\u003e: 100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Noise-Dissipation System prevents a significant amount of RFI from reaching the equipment’s ground plane.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eASYMMETRICAL DOUBLE-BALANCED GEOMETRY\u003c\/strong\u003e: Purpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCOLD-WELDED, GOLD-PLATED PURE PURPLE COPPER TERMINATIONS\u003c\/strong\u003e: This plug design allows for a connection devoid of solder, which is a common source of distortion. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of machinability. Purple Copper offers a cleaner, clearer sound than the nickel-plated or OFHC metals commonly found in competing manufacturers’ plugs. \u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"0.6M","offer_id":49950466933093,"sku":"BIG SUR RCA - 0.6M","price":277.95,"currency_code":"CAD","in_stock":true},{"title":"1M","offer_id":49950466965861,"sku":"BIG SUR RCA - 1M","price":299.95,"currency_code":"CAD","in_stock":true},{"title":"2M","offer_id":49950467031397,"sku":"BIG SUR RCA - 2M","price":354.95,"currency_code":"CAD","in_stock":true},{"title":"3M","offer_id":49950467064165,"sku":"BIG SUR RCA - 3M","price":409.95,"currency_code":"CAD","in_stock":true},{"title":"5M","offer_id":49950467096933,"sku":"BIG SUR RCA - 5M","price":519.95,"currency_code":"CAD","in_stock":true},{"title":"8M","offer_id":49950467129701,"sku":"BIG SUR RCA - 8M","price":684.95,"currency_code":"CAD","in_stock":true},{"title":"12M","offer_id":49950467162469,"sku":"BIG SUR RCA - 12M","price":904.95,"currency_code":"CAD","in_stock":true},{"title":"16M","offer_id":49950467195237,"sku":"BIG SUR RCA - 16M","price":1124.95,"currency_code":"CAD","in_stock":true},{"title":"20M","offer_id":49950467228005,"sku":"BIG SUR RCA - 20M","price":1344.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/Audioquest-big-sur-analog-audio-interconnect-rca-to-rca-Cable_1.jpg?v=1758572622"},{"product_id":"audioquest-golden-gate-3-5mm-to-rca","title":"Audioquest GOLDEN GATE Analog-Audio Interconnect 3.5mm to RCA Cable","description":"\u003cp\u003eNote: All cables in our Bridges \u0026amp; Falls Series place their left and right channels in a single jacket, and feature our Asymmetrical Double-Balanced geometry with separate high-quality positive and negative conductors. This design allows for a thin, flexible, and uniquely versatile high-performance cable that can be terminated with a variety of today’s connections, including 3.5mm (male or female), DIN, and RCA. In Bridges \u0026amp; Falls, you’ll find better metals and more sophisticated technologies — including Air-Tube insulation, Dielectric-Bias System, and Noise-Dissipation System — at lower prices than ever before. Do keep in mind, however, that, by necessity, the plugs on Bridges \u0026amp; Falls cables are fairly close together. If the L and R inputs of your components are more than 3″ (7.6cm) apart, please consider models from our Rivers or Elements Series.\u003c\/p\u003e \u003cp\u003eThe nearly magical confluence of land and sea where the San Francisco Peninsula reaching up from the south, and Marin County stretching down from the north, almost touch, was named “Chrysopylea,” meaning “golden gate,” by Captain John C. Fremont in 1846. The Golden Gate Bridge was the longest suspension bridge in the world from 1937 to 1964, when New York City’s Verrazano Narrows surpassed it by a mere 18 meters (60 ft). The main span is 1,280 meters (4,200 ft) long and 27 meters (90 ft) wide, the towers rise to 227 meters (746 ft) above the water. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSOLID PERFECT-SURFACE COPPER (PSC) CONDUCTORS\u003c\/strong\u003e: Perfect-Surface Copper has an astonishingly smooth and pure surface. Proprietary metal-processing technology protects the wire’s surface at every stage of drawing and fabrication. When high-purity low-oxide copper is kept as soft, pure and smooth as possible, it becomes a wonderfully low-distortion conductor. For over 30 years AudioQuest has pioneered the use of superior metals; yet even we were surprised by this huge leap in performance. PSC clearly outperforms previous AQ metals that cost over ten times as much. Electrical and magnetic interaction between strands in a conventional cable is the greatest source of distortion, often causing a somewhat dirty, harsh sound. Solid conductors are fundamental toward achieving Golden Gate’s very clean sound.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFOAMED-POLYETHYLENE INSULATION\u003c\/strong\u003e: Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy (loss). Some of this energy is stored and then released as distortion. Golden Gate uses air-filled Foamed-Polyethylene Insulation on both conductors because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eMETAL-LAYER NOISE-DISSIPATION SYSTEM (NDS)\u003c\/strong\u003e: 100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Noise-Dissipation System prevents a significant amount of RFI from reaching the equipment’s ground plane.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eASYMMETRICAL DOUBLE-BALANCED GEOMETRY\u003c\/strong\u003e: Purpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCOLD-WELDED, GOLD-PLATED TERMINATIONS\u003c\/strong\u003e: This plug design allows for a connection devoid of solder, which is a common source of distortion. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of machinability.\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"0.6M","offer_id":49950467260773,"sku":"GOLDEN GATE 3.5MM TO RCA - 0.6M","price":192.35,"currency_code":"CAD","in_stock":true},{"title":"1M","offer_id":49950467293541,"sku":"GOLDEN GATE 3.5MM TO RCA - 1M","price":205.95,"currency_code":"CAD","in_stock":true},{"title":"2M","offer_id":49950467359077,"sku":"GOLDEN GATE 3.5MM TO RCA - 2M","price":239.95,"currency_code":"CAD","in_stock":true},{"title":"3M","offer_id":49950467391845,"sku":"GOLDEN GATE 3.5MM TO RCA - 3M","price":273.95,"currency_code":"CAD","in_stock":true},{"title":"5M","offer_id":49950467424613,"sku":"GOLDEN GATE 3.5MM TO RCA - 5M","price":341.95,"currency_code":"CAD","in_stock":true},{"title":"8M","offer_id":49950467457381,"sku":"GOLDEN GATE 3.5MM TO RCA - 8M","price":443.95,"currency_code":"CAD","in_stock":true},{"title":"12M","offer_id":49950467490149,"sku":"GOLDEN GATE 3.5MM TO RCA - 12M","price":579.95,"currency_code":"CAD","in_stock":true},{"title":"16M","offer_id":49950467522917,"sku":"GOLDEN GATE 3.5MM TO RCA - 16M","price":715.95,"currency_code":"CAD","in_stock":true},{"title":"20M","offer_id":49950467555685,"sku":"GOLDEN GATE 3.5MM TO RCA - 20M","price":851.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/Audioquest-Golden-Gate-analog-audio-interconnect-3.5mm-to-rca-Cable.jpg?v=1758572181"},{"product_id":"audioquest-vodka-rj-e","title":"Audioquest VODKA RJ\/E (Ethernet) Cable","description":"\u003cp\u003eOver the past several years there’s been a revolution in the way people store, distribute, and access digital media (in real time), including photos, movies, and, of course, music. No longer dependent on physical media, our media is often data that’s moved from multiple devices to multiple locations. For audio applications and protocols, audio over Ethernet offers the virtues of high-speed, low time delay (latency), significant distance capability (328 feet without an active booster or repeater), and extremely low-jitter, bit-perfect communication. Who wouldn’t want all of these things?\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSOLID 10% SILVER CONDUCTORS\u003c\/strong\u003e: Solid conductors eliminate strand-interaction distortion and reduce jitter. Solid silver-plated conductors are excellent for very high-frequency applications, like Ethernet audio. These signals, being such a high frequency, travel almost exclusively on the surface of the conductor. As the surface is made of high-purity silver, the performance is very close to that of a solid silver cable, but priced much closer to solid copper cable. This is an incredibly cost effective way of manufacturing very high-quality Ethernet cables.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSOLID HIGH-DENSITY POLYETHYLENE INSULATION\u003c\/strong\u003e: Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy (loss). Some of this energy is stored and then later released as distortion. Solid High-Density Polyethylene Insulation ensures critical signal-pair geometry while minimizing insulation-induced phase distortion.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eMETAL-LAYER NOISE-DISSIPATION SYSTEM (NDS)\u003c\/strong\u003e: 100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Metal and Carbon-Loaded synthetics prevent most RFI from reaching the equipment’s ground plane.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTERMINATIONS\u003c\/strong\u003e: Precision-made low-loss ultra-wide bandwidth connectors with 100% shield coverage and strain relief.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHIGH-SPEED DATA CAPACITY\u003c\/strong\u003e: The Cat 7 cable standard has been created to allow 10- Gigabit Ethernet over 100 m of copper cabling.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDIRECTIONALITY\u003c\/strong\u003e: All audio cables are directional. The correct direction is determined by listening to every batch of metal conductors used in every AudioQuest audio cable. Arrows are clearly marked on the connectors to ensure superior sound quality. For best results have the arrow pointing in the direction of the flow of music. For example, NAS to Router, Router to Network Player.\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"0.75M","offer_id":49950467588453,"sku":"VODKA RJ\/E - 0.75M","price":859.95,"currency_code":"CAD","in_stock":true},{"title":"1.5M","offer_id":49950467621221,"sku":"VODKA RJ\/E - 1.5M","price":1099.95,"currency_code":"CAD","in_stock":true},{"title":"3M","offer_id":49950467653989,"sku":"VODKA RJ\/E - 3M","price":1499.95,"currency_code":"CAD","in_stock":true},{"title":"5M","offer_id":49950467686757,"sku":"VODKA RJ\/E - 5M","price":2099.95,"currency_code":"CAD","in_stock":true},{"title":"8M","offer_id":49950467719525,"sku":"VODKA RJ\/E - 8M","price":2999.95,"currency_code":"CAD","in_stock":true},{"title":"12M","offer_id":49950467752293,"sku":"VODKA RJ\/E - 12M","price":4299.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/Audioquest-Vodka-rj-e-ethernet-Cable.jpg?v=1758572043"},{"product_id":"audioquest-sydney-rca","title":"Audioquest SYDNEY Analog-Audio Interconnect RCA to RCA Cable","description":"\u003cp\u003eThe Sydney Harbour Bridge is the tallest and widest steel-arch bridge in the world, and the fifth longest. The “Coathanger” (the bridge’s nickname) is just behind the Sydney Opera House for worldwide recognition as a symbol of Sydney, and as a symbol for all of Australia. An organized ‘Bridge Climb’ is offered many times a day to the top of the bridge, offering a truly exceptional view of Sydney’s amazing harbor from 134 meters (440 ft) above the water.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSOLID PERFECT-SURFACE COPPER+ (PSC+) CONDUCTORS\u003c\/strong\u003e: Perfect-Surface Copper+ has an astonishingly smooth and pure surface. Proprietary metal-processing technology protects the wire’s surface at every stage of drawing and fabrication. When high-purity low-oxide copper is kept as soft, pure and smooth as possible, it becomes a wonderfully low-distortion PSC+ conductor. PSC+ is manufactured by applying the same exceptional technology to an ultra-pure copper. The resulting sound quality is even more focused and simply less in the way. For over 30 years AudioQuest has pioneered the use of superior metals; yet even we were surprised by the huge leap in performance made possible with Perfect-Surface Technology. PSC+ simply outperforms all previously available copper metals at any price. All of Sydney’s conductors are solid. Electrical and magnetic interaction between strands in a conventional cable is the greatest source of distortion, often causing a somewhat dirty, harsh sound. Solid conductors are fundamental toward achieving Sydney’s very clean sound.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePOLYETHYLENE AIR-TUBE INSULATION\u003c\/strong\u003e: Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy (loss). Some of this energy is stored and then released as distortion. All of Sydney’s conductors use PE Air-Tube Insulation because air absorbs next to no energy, and Polyethylene is low-loss and has a benign distortion profile. PE Air-Tube Insulation causes much less of the out-of-focus effect common to other materials.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCARBON-BASED 3-LAYER NOISE-DISSIPATION SYSTEM (NDS)\u003c\/strong\u003e: 100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Metal and Carbon-Loaded synthetics prevent most RFI from reaching the equipment’s ground plane.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eASYMMETRICAL DOUBLE-BALANCED GEOMETRY\u003c\/strong\u003e: Purpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCOLD-WELDED, DIRECT-SILVER PLATED PURE PURPLE COPPER TERMINATIONS\u003c\/strong\u003e: This plug design allows for a connection devoid of solder, which is a common source of distortion. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of machinability. Purple Copper offers a cleaner, clearer sound over nickel-plated or OFHC metals commonly found in competing manufacturers’ plugs. Direct-Silver Plating offers one more important step toward greater clarity and doing no harm to the signal.\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"0.6M","offer_id":49950467785061,"sku":"SYDNEY RCA - 0.6M","price":365.95,"currency_code":"CAD","in_stock":true},{"title":"1M","offer_id":49950467817829,"sku":"SYDNEY RCA - 1M","price":409.95,"currency_code":"CAD","in_stock":true},{"title":"2M","offer_id":49950467883365,"sku":"SYDNEY RCA - 2M","price":519.95,"currency_code":"CAD","in_stock":true},{"title":"3M","offer_id":49950467916133,"sku":"SYDNEY RCA - 3M","price":629.95,"currency_code":"CAD","in_stock":true},{"title":"5M","offer_id":49950467948901,"sku":"SYDNEY RCA - 5M","price":679.95,"currency_code":"CAD","in_stock":true},{"title":"8M","offer_id":49950467981669,"sku":"SYDNEY RCA - 8M","price":949.95,"currency_code":"CAD","in_stock":true},{"title":"12M","offer_id":49950468014437,"sku":"SYDNEY RCA - 12M","price":1309.95,"currency_code":"CAD","in_stock":true},{"title":"16M","offer_id":49950468047205,"sku":"SYDNEY RCA - 16M","price":1669.95,"currency_code":"CAD","in_stock":true},{"title":"20M","offer_id":49950468079973,"sku":"SYDNEY RCA - 20M","price":2029.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/Audioquest-Sydney-Analog-Audio-Interconnect-Rca-Rca-Cable.jpg?v=1758571946"},{"product_id":"audioquest-rocket-11-50m","title":"Audioquest ROCKET 11 Speaker Wire - 50M","description":"\u003cul\u003e \u003cli\u003eIdeal for Full-Range and for Single-BiWire\u003c\/li\u003e \u003cli\u003eSemi-Solid True-Concentric Conductors\u003c\/li\u003e \u003cli\u003eLong-Grain Low-Distortion Copper (LGC)\u003c\/li\u003e \u003cli\u003eDirection Controlled for Optimum Noise-Dissipation\u003c\/li\u003e \u003c\/ul\u003e","brand":"AudioQuest","offers":[{"title":"White","offer_id":49950471455077,"sku":"ROCKET 11-50M-WHITE","price":1230.0,"currency_code":"CAD","in_stock":true},{"title":"Black","offer_id":49950471487845,"sku":"ROCKET 11-50M-BLACK","price":1230.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/Audioquest-Rocket-11-Speaker-Wire-50M_baa872f7-cf89-4b29-a8d1-809499fe1c0d.jpg?v=1758311647"},{"product_id":"audioquest-rocket-11-100m","title":"Audioquest ROCKET 11 Speaker Wire - 100M","description":"\u003cul\u003e \u003cli\u003eIdeal for Full-Range and for Single-BiWire\u003c\/li\u003e \u003cli\u003eSemi-Solid True-Concentric Conductors\u003c\/li\u003e \u003cli\u003eLong-Grain Low-Distortion Copper (LGC)\u003c\/li\u003e \u003cli\u003eDirection Controlled for Optimum Noise-Dissipation\u003c\/li\u003e \u003c\/ul\u003e","brand":"AudioQuest","offers":[{"title":"White","offer_id":49950471520613,"sku":"ROCKET 11-100M-WHITE","price":2460.0,"currency_code":"CAD","in_stock":true},{"title":"Black","offer_id":49950471553381,"sku":"ROCKET 11-100M-BLACK","price":2460.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/Audioquest-Rocket-11-Speaker-Wire-100M.jpg?v=1758309899"},{"product_id":"audioquest-rocket-22-50m","title":"Audioquest ROCKET 22 Speaker Wire - 50M","description":"\u003cul\u003e \u003cli\u003ePrimarily Perfect-Surface Low-Distortion Copper (PSC)\u003c\/li\u003e \u003cli\u003e20% Lower Impedance than Rocket 11\u003c\/li\u003e \u003cli\u003eIdeal for Full-Range and for Single-BiWire\u003c\/li\u003e \u003cli\u003eSemi-Solid True-Concentric Conductors\u003c\/li\u003e \u003cli\u003eDirection Controlled for Optimum Noise-Dissipation\u003c\/li\u003e \u003c\/ul\u003e","brand":"AudioQuest","offers":[{"title":"Black","offer_id":49950471586149,"sku":"ROCKET 22-50M-BLACK","price":4100.0,"currency_code":"CAD","in_stock":true},{"title":"White","offer_id":49950471618917,"sku":"ROCKET 22-50M-WHITE","price":4100.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/Audioquest-Rocket-22-speaker-wire-50M_1_17026b10-d8ff-4d70-96c3-54434bbccdbc.jpg?v=1758309766"},{"product_id":"audioquest-nrg-y2","title":"Audioquest NRG-Y2 Low-Distortion 2-Pole Power Cable","description":"\u003cp\u003eLong-Grain Copper (LGC) with Silver-Plated Drain Wires\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"1M","offer_id":49950471651685,"sku":"NRG-Y2 1M","price":234.95,"currency_code":"CAD","in_stock":true},{"title":"2M","offer_id":49950471684453,"sku":"NRG-Y2 2M","price":269.95,"currency_code":"CAD","in_stock":true},{"title":"3M","offer_id":49950471717221,"sku":"NRG-Y2 3M","price":304.95,"currency_code":"CAD","in_stock":true},{"title":"4.5M","offer_id":49950471749989,"sku":"NRG-Y2 4.5M","price":357.45,"currency_code":"CAD","in_stock":true},{"title":"6M","offer_id":49950471782757,"sku":"NRG-Y2 6M","price":409.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/Audioquest-nrg-y2-low-distortion-2-pole-power-cable.jpg?v=1758309471"},{"product_id":"audioquest-rocket-22-100m","title":"Audioquest ROCKET 22 Speaker Wire - 100M","description":"\u003cul\u003e \u003cli\u003ePrimarily Perfect-Surface Low-Distortion Copper (PSC)\u003c\/li\u003e \u003cli\u003e20% Lower Impedance than Rocket 11\u003c\/li\u003e \u003cli\u003eIdeal for Full-Range and for Single-BiWire\u003c\/li\u003e \u003cli\u003eSemi-Solid True-Concentric Conductors\u003c\/li\u003e \u003cli\u003eDirection Controlled for Optimum Noise-Dissipation\u003c\/li\u003e \u003c\/ul\u003e","brand":"AudioQuest","offers":[{"title":"Black","offer_id":49950471815525,"sku":"ROCKET 22-100M-BLACK","price":8200.0,"currency_code":"CAD","in_stock":true},{"title":"White","offer_id":49950471848293,"sku":"ROCKET 22-100M-WHITE","price":8200.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/Audioquest-Rocket-22-speaker-wire-100M_1.jpg?v=1758309259"},{"product_id":"audioquest-nrg-y3","title":"Audioquest NRG-Y3 Low-Distortion 3-Pole 15 AMP Power Cable","description":"\u003cp\u003eLong-Grain Copper (LGC) with Silver-Plated Drain Wires\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"1M","offer_id":49950471881061,"sku":"NRG-Y3 1M","price":284.95,"currency_code":"CAD","in_stock":true},{"title":"2M","offer_id":49950471913829,"sku":"NRG-Y3 2M","price":339.95,"currency_code":"CAD","in_stock":true},{"title":"3M","offer_id":49950471946597,"sku":"NRG-Y3 3M","price":394.95,"currency_code":"CAD","in_stock":true},{"title":"4.5M","offer_id":49950471979365,"sku":"NRG-Y3 4.5M","price":477.45,"currency_code":"CAD","in_stock":true},{"title":"6M","offer_id":49950472012133,"sku":"NRG-Y3 6M","price":559.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/Audioquest-Nrg-y3-Low-Distortion-3-Pole-15-amp-Power-Cable.jpg?v=1758308206"},{"product_id":"audioquest-nrg-z2","title":"Audioquest NRG-Z2 Low-Distortion 2-Pole Power Cable","description":"\u003cp\u003ePerfect-Surface Copper+ (PSC+) with Silver-Plated Drain Wires\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"1M","offer_id":49950472044901,"sku":"NRG-Z2 1M","price":379.95,"currency_code":"CAD","in_stock":true},{"title":"2M","offer_id":49950472077669,"sku":"NRG-Z2 2M","price":459.95,"currency_code":"CAD","in_stock":true},{"title":"3M","offer_id":49950472110437,"sku":"NRG-Z2 3M","price":539.95,"currency_code":"CAD","in_stock":true},{"title":"4.5M","offer_id":49950472143205,"sku":"NRG-Z2 4.5M","price":659.95,"currency_code":"CAD","in_stock":true},{"title":"6M","offer_id":49950472175973,"sku":"NRG-Z2 6M","price":779.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/Audioquest-Nrg-Z2-Low-Distortion-2-Pole-Power-Cable.jpg?v=1758308109"},{"product_id":"audioquest-nrg-z3","title":"Audioquest NRG-Z3 Low-Distortion 3-Pole 15 AMP Power Cable","description":"\u003cul\u003e \u003cli\u003ePerfect-Surface Copper (PSC) with Silver-Plated Drain Wires\u003c\/li\u003e \u003cli\u003eQuiet Background and Minimal Active-Circuit Misbehavior Due to Ground-Noise\u003c\/li\u003e \u003c\/ul\u003e","brand":"AudioQuest","offers":[{"title":"1M","offer_id":49950472208741,"sku":"NRG-Z3 1M","price":434.95,"currency_code":"CAD","in_stock":true},{"title":"2M","offer_id":49950472241509,"sku":"NRG-Z3 2M","price":569.95,"currency_code":"CAD","in_stock":true},{"title":"3M","offer_id":49950472274277,"sku":"NRG-Z3 3M","price":704.95,"currency_code":"CAD","in_stock":true},{"title":"4.5M","offer_id":49950472307045,"sku":"NRG-Z3 4.5M","price":907.45,"currency_code":"CAD","in_stock":true},{"title":"6M","offer_id":49950472339813,"sku":"NRG-Z3 6M","price":1109.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/Audioquest-Nrg-Z3-Low-Distortion-3-Pole-15-amp-Power-Cable.jpg?v=1758307969"},{"product_id":"audioquest-niagara-7000","title":"Audioquest NIAGARA 7000 Low-Z Power, Noise-Dissipation System","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eTwo Patented Dielectric-Biased Symmetrical Power Isolation Transformers (Source Component Outlets)\u003c\/li\u003e \u003cli\u003e90 Amps Peak AC Transient Power Correction (Increased Performance and Current Reservoir for Any Power Amplifier)\u003c\/li\u003e \u003cli\u003eIn Excess of 23 Octaves of Linearized Transverse-Mode (Differential) Filtering\u003c\/li\u003e \u003cli\u003ePatented Ground Noise-Dissipation Technology\u003c\/li\u003e \u003cli\u003eNon-Sacrificial and Sonically Non-Invasive Over-Voltage ShutDown and Transient Surge Suppression\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eAudioQuest is proud to introduce our Niagara 7000 Low-Z Power Noise-Dissipation System, a complete rethinking of AC power filtration, designed by one of the field’s foremost experts, Garth Powell. As with every AQ product before, and more recently our DragonFly USB DAC and NightHawk headphones, we would not have entered this field if we didn’t think we had something special and significant to offer. In Niagara 7000, we believe we’ve created a product that revolutionizes the art and science of AC power—a product that will inspire audio\/video enthusiasts and help to create an even more immersive, emotionally compelling experience.\u003c\/p\u003e \u003cp\u003eIn designing Niagara 7000, we aimed to successfully address problems that prevent today’s audio\/video components from achieving their potential. Due to the great increase in airborne and AC-line-transmitted radio signals, combined with overtaxed utility lines and the ever-increasing demands from high-definition audio\/video components, a complete rethinking of AC power technology is needed to provide our A\/V systems with the power required to fulfill their potential.\u003c\/p\u003e \u003cp\u003eFurther, today’s power amplifiers are being taxed for instantaneous peak-current demand, even when they’re driven at modest volumes. Although we have seen a substantial increase in dynamic range from much of our audio software, the loudspeakers we employ to reproduce them are often no more efficient than they were 50 years ago. This places great demands on an amplifier’s power supply, as well as the source AC power supplying it. In our efforts to properly accommodate the promise of today’s ever-increasing bandwidth and dynamic range, the Niagara 7000 affords extremely low system noise and provides superior current delivery across a very wide range of frequencies.\u003c\/p\u003e \u003cp\u003eThrough differential sample tests and spectrum analysis, it can be proven that up to a third of a high-resolution (low-level) audio signal can be lost, masked, or highly distorted by the vast levels of noise riding along the AC power lines that feed our components. This noise couples with the signal circuitry as current noise and through AC ground, permanently distorting and\/or masking the source signal. Our systems’ sensitive components need better alternating current.\u003c\/p\u003e \u003cp\u003eWe realize that true audio\/video optimization is never a matter of any one secret or exotic circuit. When it comes to noise dissipation for AC power, many approaches can yield meaningful results. However, these approaches may also impart ringing, current compression, and non-linear distortions that can render the cure worse than the disease. While there currently exist a number of AC power conditioners, isolation transformers, regeneration amplifiers, and battery back-up system topologies, Niagara 7000 takes a holistic, science-based approach to AC power technology and represents a comprehensive solution to the ever-increasing noise that plagues our power lines.\u003c\/p\u003e \u003cp\u003eIn the Niagara 7000, you’ll find optimized radio-frequency lead directionality, run-in capacitor forming technologies developed by Jet Propulsion Laboratories and NASA, and AC inlet and outlet contacts with heavy silver plating over extreme-purity copper assuring the tightest grip possible.\u003c\/p\u003e \u003cp\u003eThe Niagara 7000 uses our patented AC Ground Noise-Dissipation System, the world’s first Dielectric-Biased AC Isolation Transformers, and the widest bandwidth-linearized noise-dissipation circuit in the industry. Our unique passive\/active Transient Power Correction Circuit features an instantaneous current reservoir of over 90 amps peak, specifically designed for today’s current-starved power amplifiers. Most AC power products featuring “high-current outlets” merely minimize current compression; the Niagara 7000 corrects it.\u003c\/p\u003e \u003cp\u003eWith an AudioQuest Niagara 7000, music lovers can finally experience the clarity, dimensionality, frequency extension, dynamic contrast, and grip their A\/V systems have been capable of delivering—if only the power had been right!\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"Default Title","offer_id":49950472372581,"sku":"NIAGARA 7000","price":15900.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/Audioquest-niagara-7000-Low-Z-power-Noise-Dissipation-System.jpg?v=1758307773"},{"product_id":"audioquest-thunder-15amp","title":"Audioquest THUNDER High-Current 15 AMP Power Cable","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eSolid Long-Grain Copper (LGC)\/ Perfect-Surface Copper (PSC) Conductors\u003c\/li\u003e \u003cli\u003eUncompressed High-Current Transfer\u003c\/li\u003e \u003cli\u003eGround Noise Dissipation Technology (US Patent # 9,373,439)\u003c\/li\u003e \u003cli\u003eZero Characteristic Impedance (50Hz – 1MHz)\u003c\/li\u003e \u003cli\u003e72VDC Dielectric Bias System (US Patent #7,126,055)\u003c\/li\u003e \u003cli\u003eDirectionally Controlled Conductors\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eAlternating Current (AC), is a far-from-perfect power source. AC power technology is well over a century old and was never designed to meet the exacting standards of today’s high resolution audio-video components. AC noise is present at the utility source, and is then exacerbated by radio frequency noise that is induced (picked up by the AC power cord) and coupled to the component power supplies and to circuit ground. This creates distortion and low-level signal losses via the “masking effect.” Further, power amplifiers can require immense reserves of transient current for their power supplies to react to and then stabilize during dynamic audio passages. Most AC power cords and power conditioner-regenerators, though helpful to a point, are simply not up to the task.\u003c\/p\u003e \u003cp\u003ePower amplifiers present a real challenge for any AC power source, as the transient current requirements (though short in duration) can be many times that of the average (RMS) current consumption. Power amplifiers are also unique from all other components in that the current draw is dynamic, not constant, and it changes with volume and audio signal content. Though many AC power cords may feature low DC resistance to allow for some of this requirement, the characteristic impedance of the AC cable is equally responsible for assuring uncompromised performance. Many premium AC cords constrict or compress the audio transient as their characteristic impedance restricts the transient current.\u003c\/p\u003e \u003ch3\u003eDIRECTIONALITY\u003c\/h3\u003e \u003cp\u003eAll drawn metal strands or conductors have a non-symmetrical, and therefore directional, grain structure. AudioQuest controls the resulting RF impedance variation so that noise is drained away from where it will cause distortion. The correct direction is determined by listening to every batch of metal conductors used in every AudioQuest audio cable. Arrows are clearly marked on the connectors to ensure superior sound quality.\u003c\/p\u003e \u003ch3\u003eDIELECTRIC-BIAS SYSTEM WITH RADIO FREQUENCY TRAP\u003c\/h3\u003e \u003cp\u003eAll insulation between two or more conductors is also a dielectric whose properties will affect the integrity of the signal. When the dielectric is unbiased, dielectric-involvement (absorption and non-linear release of energy) causes different amounts of time delay (phase shift) for different frequencies and energy levels, which is a real problem for very time-sensitive multi-octave audio. The inclusion of an RF Trap (developed for AudioQuest’s Niagara Series of power products), ensures that radio frequency noise will not be induced into the signal conductors from the DBS field elements.(DBS, US Pat #s 7,126,055 \u0026amp; 7,872,195 B1)\u003c\/p\u003e \u003ch3\u003eGROUND NOISE-DISSIPATION TECHNOLOGY\u003c\/h3\u003e \u003cp\u003eAC Ground wires provide protection from current-wiring faults, but they also act as antennas. Thus, they are subject to induced radio frequency (RF) noise. This RF noise bypasses component power supplies and is typically coupled directly into a system’s most sensitive audio-video circuits. AudioQuest’s patented Ground-Noise Dissipation greatly reduces this distortion, yielding unprecedented levels of noise dissipation across the widest bandwidth (range) of radio frequencies possible. Our unique circuit-topology utilizes a common-mode phase-cancelling array, in concert with proprietary dielectric materials which provide additional differential linear filtering. (US Patent # 9,373,439)\u003c\/p\u003e \u003ch3\u003eHIGH PURITY CONDUCTORS - LONG-GRAIN COPPER (LGC) AND PERFECT-SURFACE COPPER (PSC)\u003c\/h3\u003e \u003cp\u003eA carefully finessed combination of solid high-purity Long-Grain Copper (LGC) and high-purity Perfect-Surface Copper (PSC) conductors prevent strand interaction, a major source of ear fatiguing transient intermodulation distortion. LGC allows a smoother and clearer sound than standard OFHC (Oxygen-Free-High-Conductivity) copper. The astonishingly smooth and pure Perfect-Surface Copper further eliminates harshness and greatly increases clarity compared to OFHC, OCC, 8N and other premium coppers.\u003c\/p\u003e \u003ch3\u003eUNCOMPRESSED HIGH-CURRENT TRANSFER\u003c\/h3\u003e \u003cp\u003eWith current capacity of 20 amps RMS @ 125VAC 50\/60Hz (16 amps RMS @ 220-240VA 50\/60Hz), Thunder\/High-Current can withstand current transient peaks many times its continuous (average) RMS rating. This makes Thunder\/High-Current ideally suited for a wide assortment of AC power conditioners, power regenerators, AC isolation transformers, and AC battery back-up devices, as well as any power amplifier, powered subwoofer, powered loudspeaker, powered receiver, or integrated amplifier.\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"1M","offer_id":49950472405349,"sku":"THUNDER 15AMP - 1M","price":1595.0,"currency_code":"CAD","in_stock":true},{"title":"2M","offer_id":49950472438117,"sku":"THUNDER 15AMP - 2M","price":1995.0,"currency_code":"CAD","in_stock":true},{"title":"3M","offer_id":49950472470885,"sku":"THUNDER 15AMP - 3M","price":2395.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/Audioquest-thunder-High-Current-15-amp-Power-Cable.jpg?v=1758307607"},{"product_id":"audioquest-thunder-20amp","title":"Audioquest THUNDER High-Current 20 AMP Power Cable","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eSolid Long-Grain Copper (LGC)\/ Perfect-Surface Copper (PSC) Conductors\u003c\/li\u003e \u003cli\u003eUncompressed High-Current Transfer\u003c\/li\u003e \u003cli\u003eGround Noise Dissipation Technology (US Patent # 9,373,439)\u003c\/li\u003e \u003cli\u003eZero Characteristic Impedance (50Hz – 1MHz)\u003c\/li\u003e \u003cli\u003e72VDC Dielectric Bias System (US Patent #7,126,055)\u003c\/li\u003e \u003cli\u003eDirectionally Controlled Conductors\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eAlternating Current (AC), is a far-from-perfect power source. AC power technology is well over a century old and was never designed to meet the exacting standards of today’s high resolution audio-video components. AC noise is present at the utility source, and is then exacerbated by radio frequency noise that is induced (picked up by the AC power cord) and coupled to the component power supplies and to circuit ground. This creates distortion and low-level signal losses via the “masking effect.” Further, power amplifiers can require immense reserves of transient current for their power supplies to react to and then stabilize during dynamic audio passages. Most AC power cords and power conditioner-regenerators, though helpful to a point, are simply not up to the task.\u003c\/p\u003e \u003cp\u003ePower amplifiers present a real challenge for any AC power source, as the transient current requirements (though short in duration) can be many times that of the average (RMS) current consumption. Power amplifiers are also unique from all other components in that the current draw is dynamic, not constant, and it changes with volume and audio signal content. Though many AC power cords may feature low DC resistance to allow for some of this requirement, the characteristic impedance of the AC cable is equally responsible for assuring uncompromised performance. Many premium AC cords constrict or compress the audio transient as their characteristic impedance restricts the transient current.\u003c\/p\u003e \u003ch3\u003eDIRECTIONALITY\u003c\/h3\u003e \u003cp\u003eAll drawn metal strands or conductors have a non-symmetrical, and therefore directional, grain structure. AudioQuest controls the resulting RF impedance variation so that noise is drained away from where it will cause distortion. The correct direction is determined by listening to every batch of metal conductors used in every AudioQuest audio cable. Arrows are clearly marked on the connectors to ensure superior sound quality.\u003c\/p\u003e \u003ch3\u003eDIELECTRIC-BIAS SYSTEM WITH RADIO FREQUENCY TRAP\u003c\/h3\u003e \u003cp\u003eAll insulation between two or more conductors is also a dielectric whose properties will affect the integrity of the signal. When the dielectric is unbiased, dielectric-involvement (absorption and non-linear release of energy) causes different amounts of time delay (phase shift) for different frequencies and energy levels, which is a real problem for very time-sensitive multi-octave audio. The inclusion of an RF Trap (developed for AudioQuest’s Niagara Series of power products), ensures that radio frequency noise will not be induced into the signal conductors from the DBS field elements.(DBS, US Pat #s 7,126,055 \u0026amp; 7,872,195 B1)\u003c\/p\u003e \u003ch3\u003eGROUND NOISE-DISSIPATION TECHNOLOGY\u003c\/h3\u003e \u003cp\u003eAC Ground wires provide protection from current-wiring faults, but they also act as antennas. Thus, they are subject to induced radio frequency (RF) noise. This RF noise bypasses component power supplies and is typically coupled directly into a system’s most sensitive audio-video circuits. AudioQuest’s patented Ground-Noise Dissipation greatly reduces this distortion, yielding unprecedented levels of noise dissipation across the widest bandwidth (range) of radio frequencies possible. Our unique circuit-topology utilizes a common-mode phase-cancelling array, in concert with proprietary dielectric materials which provide additional differential linear filtering. (US Patent # 9,373,439)\u003c\/p\u003e \u003ch3\u003eHIGH PURITY CONDUCTORS - LONG-GRAIN COPPER (LGC) AND PERFECT-SURFACE COPPER (PSC)\u003c\/h3\u003e \u003cp\u003eA carefully finessed combination of solid high-purity Long-Grain Copper (LGC) and high-purity Perfect-Surface Copper (PSC) conductors prevent strand interaction, a major source of ear fatiguing transient intermodulation distortion. LGC allows a smoother and clearer sound than standard OFHC (Oxygen-Free-High-Conductivity) copper. The astonishingly smooth and pure Perfect-Surface Copper further eliminates harshness and greatly increases clarity compared to OFHC, OCC, 8N and other premium coppers.\u003c\/p\u003e \u003ch3\u003eUNCOMPRESSED HIGH-CURRENT TRANSFER\u003c\/h3\u003e \u003cp\u003eWith current capacity of 20 amps RMS @ 125VAC 50\/60Hz (16 amps RMS @ 220-240VA 50\/60Hz), Thunder\/High-Current can withstand current transient peaks many times its continuous (average) RMS rating. This makes Thunder\/High-Current ideally suited for a wide assortment of AC power conditioners, power regenerators, AC isolation transformers, and AC battery back-up devices, as well as any power amplifier, powered subwoofer, powered loudspeaker, powered receiver, or integrated amplifier.\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"1M","offer_id":49950472503653,"sku":"THUNDER 20AMP - 1M","price":1595.0,"currency_code":"CAD","in_stock":true},{"title":"2M","offer_id":49950472536421,"sku":"THUNDER 20AMP - 2M","price":1995.0,"currency_code":"CAD","in_stock":true},{"title":"3M","offer_id":49950472569189,"sku":"THUNDER 20AMP - 3M","price":2395.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/Audioquest-thunder-High-Current-20-amp-Power-Cable.jpg?v=1758307398"},{"product_id":"audioquest-greyhound","title":"Audioquest GREYHOUND Subwoofer Cable","description":"\u003cp\u003eThough its combination of long legs, deep chest, flexible spine, and slender build make it an excellent hunting and racing breed, capable of reaching speeds in excess of 64 kilometers per hour (40 MPH), the gentle, intelligent greyhound would just as well spend its day simply and quietly enjoying long naps in the soft shade. Greyhounds rarely bark, are very patient, show great devotion and affection toward their families, and exhibit a surprisingly friendly attitude toward people and other dogs. But don’t be misled by their distinctly slim conformation: Greyhounds are in fact exceedingly healthy, powerful animals, and they make loyal, loving companions for people young and old.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSOLID 0.5% SILVER CONDUCTORS\u003c\/strong\u003e: Solid conductors eliminate strand-interaction distortion and reduce jitter. Solid silver-plated conductors are excellent for very high-frequency applications. These signals, being such a high frequency, travel almost exclusively on the surface of the conductor. As the surface is made of high-purity silver, the performance is very close to that of a solid silver cable, but priced much closer to solid copper cable. This is an incredibly cost effective way of manufacturing very high-quality subwoofer cables.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFOAMED-POLYETHYLENE INSULATION\u003c\/strong\u003e: Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy (loss). Some of this energy is stored and then released as distortion. Greyhound uses air-filled Foamed-Polyethylene Insulation on both conductors because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eMETAL-LAYER NOISE-DISSIPATION SYSTEM (NDS)\u003c\/strong\u003e: 100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Noise-Dissipation System prevents a significant amount of RFI from reaching the equipment’s ground plane.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHYPERLITZ COAX GEOMETRY\u003c\/strong\u003e: In Greyhound, a perfect circle of eight negative conductors spiral around a single larger positive conductor, creating a cable with a large cross-sectional area, minimizing skin effect, and providing low resistance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCOLD-WELDED GOLD-PLATED PLUGS\u003c\/strong\u003e: This plug design allows for a connection devoid of solder, which is a common source of distortion. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of machinability.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eGROUNDING\u003c\/strong\u003e: Sometimes there is a hum problem unless the subwoofer and AV receiver (or surround-sound processor) are attached to each other using a separate wire. If your system has a hum problem, try attaching the little spade-lug tails to the metal chassis of the subwoofer amplifier and to the chassis of the sending component. Usually, this extra wire will not be needed.\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"2M","offer_id":49950485348709,"sku":"GREYHOUND-2M","price":114.95,"currency_code":"CAD","in_stock":true},{"title":"3M","offer_id":49950485381477,"sku":"GREYHOUND-3M","price":134.95,"currency_code":"CAD","in_stock":true},{"title":"5M","offer_id":50170002375013,"sku":"GREYHOUND 5M","price":174.95,"currency_code":"CAD","in_stock":true},{"title":"8M","offer_id":49950485414245,"sku":"GREYHOUND-8M","price":234.95,"currency_code":"CAD","in_stock":true},{"title":"12M","offer_id":50170002407781,"sku":"GREYHOUND 12M","price":314.95,"currency_code":"CAD","in_stock":true},{"title":"16M","offer_id":50170002440549,"sku":"GREYHOUND 16M","price":294.95,"currency_code":"CAD","in_stock":true},{"title":"20M","offer_id":50170002473317,"sku":"GREYHOUND 20M","price":474.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/audioquest-greyhound-subwoofer-cable.png?v=1770935765"},{"product_id":"audioquest-blueberry-hdmi","title":"Audioquest BlueBerry 8K HDMI Cable","description":"\u003cp\u003eAudioQuest BlueBerry4K-8K 18Gbps HDMI cable combines superior materials and superior design to produce a superior entertainment experience. Featuring solid Long-Grain Copper conductors with AudioQuest’s Level-1 Noise Dissipation, BlueBerryis meticulously designed for enhanced soundquality and outstanding overall performance, significantly exceeding the performance of previous AudioQuest Pearl 18G HDMI cables. Of course, AudioQuest’s BlueBerry 18Gbps HDMI cable is guaranteed to have the 18Gbps bandwidth required for compelling features like 8K\/30 video, HDR (High Dynamic Range) imagery, and eARC (enhanced Audio Return Channel). Taking performance even further, all 19 conductors, comprising A\/V and eARC signals, all Ground-Reference drains, and control and power conductors, are properly controlled for the most efficient dissipation of Radio-Frequency Noise.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e4K\/8K capable\u003c\/li\u003e \u003cli\u003e18G bandwidth for 8K\/30 video, HDR (High Dynamic Range) imagery, eARC (enhanced Audio Return Channel), more\u003c\/li\u003e \u003cli\u003eSolid Long-Grain Copper A\/V and eARC conductors\u003c\/li\u003e \u003cli\u003eTinned Copper Ground Reference\u003c\/li\u003e \u003cli\u003eLevel-1 Noise Dissipation: All 19 Conductors Directionally Controlled\u003c\/li\u003e \u003c\/ul\u003e","brand":"AudioQuest","offers":[{"title":"0.75M","offer_id":49950485447013,"sku":"BLUEBERRY HDMI-0.75M","price":39.95,"currency_code":"CAD","in_stock":true},{"title":"1.5M","offer_id":49950485479781,"sku":"BLUEBERRY HDMI-1.5M","price":49.95,"currency_code":"CAD","in_stock":true},{"title":"2.25M","offer_id":49950485512549,"sku":"BLUEBERRY HDMI-2.25M","price":64.95,"currency_code":"CAD","in_stock":true},{"title":"3M","offer_id":49950485545317,"sku":"BLUEBERRY HDMI-3M","price":74.95,"currency_code":"CAD","in_stock":true},{"title":"5M","offer_id":49950485578085,"sku":"BLUEBERRY HDMI-5M","price":129.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/Audioquest-Blueberry-8k-hdmi-Cable.jpg?v=1758306900"},{"product_id":"audioquest-pearl-48-hdmi","title":"Audioquest Pearl 48 HDMI Cable - 8K-10K 48Gbps","description":"\u003cp\u003eAudioQuest Pearl 48 8K-10K 48Gbps HDMI cable combines superior materials and superior design to produce a superiorentertainment experience. Featuring solid Long-Grain Copper conductorswith AudioQuest’s Level-1 Noise Dissipation, Pearl 48 is meticulously designed for enhanced sound quality and outstanding overall performance. Of course, all AudioQuest 48G HDMI cablescan transfer up to professional 10K Ultra HD video, support Dynamic HDR, and have the conductors and bandwidth required for eARC’s enhanced sonic capabilities. Taking performance even further, all 19 conductors, comprising A\/V and eARC signals, all Ground-Reference drains, and control and power conductors, are properly controlled for the most efficient dissipation of Radio-Frequency Noise.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e8K\/10K capable\u003c\/li\u003e \u003cli\u003e48G bandwidth for 8K\/60 and 4K\/120 video, HDR (High Dynamic Range) imagery,eARC (enhanced Audio Return Channel), more\u003c\/li\u003e \u003cli\u003eSolid Long-Grain Copper A\/V and eARC conductors\u003c\/li\u003e \u003cli\u003eTinned Copper Ground Reference\u003c\/li\u003e \u003cli\u003eLevel-1 Noise Dissipation: All 19 Conductors Directionally Controlled\u003c\/li\u003e \u003c\/ul\u003e","brand":"AudioQuest","offers":[{"title":"0.75M","offer_id":49950485610853,"sku":"PEARL 48 HDMI-0.75M","price":51.95,"currency_code":"CAD","in_stock":true},{"title":"1.5M","offer_id":49950485643621,"sku":"PEARL 48 HDMI-1.5M","price":64.95,"currency_code":"CAD","in_stock":true},{"title":"2.25M","offer_id":49950485676389,"sku":"PEARL 48 HDMI-2.25M","price":79.95,"currency_code":"CAD","in_stock":true},{"title":"3M","offer_id":49950485709157,"sku":"PEARL 48 HDMI-3M","price":99.95,"currency_code":"CAD","in_stock":true},{"title":"5M","offer_id":49950485741925,"sku":"PEARL 48 HDMI-5M","price":259.95,"currency_code":"CAD","in_stock":true},{"title":"10M","offer_id":49950485774693,"sku":"PEARL 48 HDMI-10M","price":324.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/Audioquest-Pearl-48-hdmi-Cable-8K-10K-48Gbps.jpg?v=1758305268"},{"product_id":"audioquest-forest-48-hdmi","title":"Audioquest Forest 48 HDMI Cable - 8K-10K 48Gbps","description":"\u003cp\u003eAudioQuest Forest 48 8K-10K 48Gbps HDMI cable combines superior materials and superior design to produce a superior entertainment experience. Featuring solid 0.5% Silver-Plated Long-Grain Copper conductors with AudioQuest’s Level-1 Noise Dissipation,Forest 48 is meticulously designed for enhanced sound quality and outstanding overall performance. Of course, all AudioQuest 48G HDMI cables can transfer up to professional 10K Ultra HD video, support Dynamic HDR, and have the conductors and bandwidth required for eARC’s enhanced sonic capabilities. Taking performance even further, all 19conductors, comprising A\/V and eARC signals, all Ground-Reference drains, and control and power conductors, are properly controlled for the most efficient dissipation of Radio-Frequency Noise.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e8K\/10K capable\u003c\/li\u003e \u003cli\u003e48G bandwidth for 8K\/60 and 4K\/120 video, HDR (High Dynamic Range) imagery,eARC (enhanced Audio Return Channel), more\u003c\/li\u003e \u003cli\u003eSolid 0.5% Silver-Plated Long-Grain Copper A\/V and eARC conductors\u003c\/li\u003e \u003cli\u003eTinned Copper Ground Reference\u003c\/li\u003e \u003cli\u003eLevel-1 Noise Dissipation: All 19 Conductors Directionally Controlled\u003c\/li\u003e \u003c\/ul\u003e","brand":"AudioQuest","offers":[{"title":"0.75M","offer_id":49950485807461,"sku":"FOREST 48 HDMI-0.75M","price":109.95,"currency_code":"CAD","in_stock":true},{"title":"1.5M","offer_id":49950485840229,"sku":"FOREST 48 HDMI-1.5M","price":142.95,"currency_code":"CAD","in_stock":true},{"title":"2.25M","offer_id":49950485872997,"sku":"FOREST 48 HDMI-2.25M","price":164.95,"currency_code":"CAD","in_stock":true},{"title":"3M","offer_id":49950485905765,"sku":"FOREST 48 HDMI-3M","price":199.95,"currency_code":"CAD","in_stock":true},{"title":"5M","offer_id":49950485938533,"sku":"FOREST 48 HDMI-5M","price":419.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/files\/Audioquest-Forest-48-hdmi-Cable-8K-10K-48Gbps.jpg?v=1758305154"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/5440\/4453\/collections\/Audioquest_Logo-3510119.png?v=1763410622","url":"https:\/\/trutone.ca\/collections\/audioquest.oembed?page=2","provider":"Trutone Electronics","version":"1.0","type":"link"}